DeVillbiss Air Power Company D28921 Moving and Storage Instructions, Lubrication, Water Screen

Page 15

5.3LUBRICATION

The pressure washer is designed with a permanent lubrication system. Conventional oil check and oil changes are not necessary.

NOTE: IN CASE OF OIL LEAKAGE, CONTACT CUSTOMER SERVICE DEPARTMENT CONCERNING REPAIR. A SMALL AMOUNT OF OIL LEAKAGE IS NORMAL.

5.4WATER SCREEN

The pressure washer is equipped with a water inlet screen to protect the pump.

If the screen is not kept clean, the flow of water to the pressure washer will be restricted and the pump may be damaged.

λTo clean inner water screen, remove quick connect and remove the filter screen from the pump inlet. (see page 4, item 13)

λBackflush screen to clean

λReplace screen and quick connect immediately to prevent any foreign matter from entering the pump.

Do not damage the screen while removing or cleaning. Any foreign particles entering the pump may damage the pump.

5.5COOLING SYSTEM

The air vents, located in and around the pressure washer, must be kept clean and free of any obstructions to ensure proper air cooling of the motor during operation.

prevent water from penetrating the vents of the pressure washer to minimize the risk of damage to the machine and to reduce the risk of shock to the operator.

6.0MOVING AND STORAGE INSTRUCTIONS

Always store your pressure washer in a location where the temperature will not fall below 32°F. The pump in this machine is susceptible to permanent

damage if frozen. FREEZE DAMAGE IS NOT COVERED BY THE WARRANTY.

If you must store your pressure washer in a location where the temperature is below 32°F, you can minimize the chance of damage to your machine by utilizing the following procedure:

1.Stop the pressure washer and detach supply hose and high pressure hose.

2.Squeeze the trigger of the discharge gun to drain all water from the wand and hose.

3.Restart the pressure washer and let it run briefly (about 5 seconds) until water no longer discharges from the high pressure outlet.

6.1AFTER EXTENDED STORAGE

Scale deposits may form in the pump when it is not used for some time.

This causes the motor to run stiff or it may not start up at all.

Remove scale deposits from the piping.

λConnect machine to water supply and rinse thoroughly with water. Do not plug unit into electrical outlet.

To avoid electrical overloading turn the motor shaft by hand.

15- ENG

D28921

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Pressure Washer Index Safety and Operation RulesInterrupter Gfci for your personal protection Risk of Electrical ShockRisk of Explosion or Fire Risk to BreathingSimple CUT! See a physician immediately Risk of Unsafe OperationOthers Risk of HOT SurfacesGrounding Instructions Risk of Injury from SprayParts Drawing Parts ListGround. Do not touch plug with wet hands Safety FeaturesMotor Overload Extension CordsProper water connection InstallationPower Supply Connection Water ConnectionOperating Instructions START-UP ProcedureHigh PRESSURE/LOW Pressure High PRESSURE/TURBO Spray Adjustable Spray NozzleDo not move the nozzle to adjust pressure To avoid damage to the surface being sprayedUSE of Cleaning Chemicals Cleaning TechniquesApplication of Soap Degreaser Connections MaintenanceApplication of Liquid Vehicle WAX END of OperationCooling System Moving and Storage InstructionsLubrication Water ScreenProblem Possible Cause Correction TroubleshootingProblem Possible Cause Correction Technical Data Replacement Parts and AccessoriesDo not Return this Product to the Store See OUR WEB Site for Replacement and or Missing PartsResponsibility of Original Purchaser initial User Limited WarrantyManual de funcionamiento El equipo hasta haber leído el Manual de funcionamiento Normas Operativas Y DE SeguridadNo usar con cordones de extensión QUÉ Puede Ocurrir Cómo PrevenirloQUÉ Puede Ocurrir Simple CORTE! ¡Vea a un médicoInmediatamente Riesgo DE Superficies Calientes Istrucciones Para LA Puesta a Tierra Conservar Estas InstruccionesDiseño Piezas Lista Piezas Del circuito o en tomas protegidas Características Relativas a LA SeguridadSobrecarga DEL Motor ExtensionesEnlace DE LA Alimentación Eléctrica InstalaciónConexión DEL Agua Tubo DE Alta PresiónBloqueo de seguridad abierto Instrucciones DE USOProcedimiento DE Puesta EN Marcha Bloqueo de seguridad cerradoAlta Presión / Baja Presión Daños y perjuiciosChorro Rotatorio Boquilla Chorro RegulableChorro DE Alta Presión / Turbo No actúen sobre la boquilla para modificar la presiónCalientes o bajo la luz directa del sol USO DE Productos QuímicosTécnicas DE Limpieza Aplicación DE Desengrasante a Base DE JabónConexiones ManutenciónAplicación DE LA Cera Finalización DE LA OperaciónSistema DE Refrigeración Manipulación Y AlmacenamientoLubricación Filtro DE AguaLocalización DE LAS Averías Problemas Causas Probables Soluión37- SP Datos Técnicos Piezas DE Repuesto Y AccesoriosNo Manden SU Equipo AL Almacén Responsabilidad DEL Comprador Original Usuario inicial Garantía LimitadaManuel de lutilisateur Règles DE Sécurité ET Dutilisation Table DES MatièresRisque Pas de manière appropriée, à moins quil ne soitTerre Risque Dinjection DUN Fluide Risque DE Surfaces Chaudes Instructions DE Mise À Terre Conserver CES DirectivesListe DES Pièces Dessins DES PiècesRallonges DE Cordon Caractéristiques DE SécuritéSurcharge DU Moteur Protection Dinterrupteur DE Circuit DE Mise À TerreBranchement DE Lalimentation Électrique Alimentation DeauBoyau À Haute Pression Raccord Dalimentation DeauInstructions Dutilisation Procédure DE Mise EN Service51- FR Haute Pression / Basse PressionNe pas déplacer la buse pour régler la pression Buse DE Vaporisation RéglableÉviter les dommages à la surface à nettoyer Haute Pression / JET RotatifUsage DES Produits Chimiques DE Nettoyage Techniques DE NettoyageApplication DE Savon Dégraisseur Connexions EntretienApplication DE LA Cire Liquide Pour Véhicule Après LutilisationSystème DE Refroidissement Instructions DE Manutention ET DentreposageLubrification Filtre À EAUDépannage Problème Cause Possible Solution57- FR Données Techniques Pièces DE Rechange ET AccessoiresNE PAS Renvoyer CE Produit AU Magasin Responsabilité DE Lacheteur Dorigine utilisateur initial Garantie Limitée

D28921, WD1600E specifications

DeVilbiss Air Power Company, a renowned name in the air compressor industry, has made its mark with the introduction of the D28921 and WD1600E models. These compressors are designed to cater to both professional and DIY users, ensuring efficiency, reliability, and versatility in a wide range of applications.

The D28921 model stands out due to its compact design, making it an ideal choice for users with limited space. With its portable configuration, it features durable wheels and a sturdy handle, allowing for easy maneuverability. This model is equipped with a robust 1.5 HP electric motor, which produces an impressive airflow of up to 3.2 CFM at 90 PSI. Its 4-gallon tank ensures a sufficient air supply, making it suitable for tasks such as inflating tires, powering nail guns, and more. The D28921 also incorporates a maintenance-free oil-less pump, reducing the hassle of upkeep and delivering reliable performance over time.

On the other hand, the WD1600E model offers enhanced power and versatility. With a powerful 2 HP motor, this compressor delivers an impressive maximum pressure of 125 PSI. The 6-gallon tank provides ample air storage for demanding tasks, such as spray painting, airbrushing, and operating pneumatic tools. One of the key features of the WD1600E is its dual-output design, allowing users to connect multiple tools simultaneously without sacrificing performance. This feature is particularly beneficial for professionals who require efficient operation while tackling jobs in structured environments.

Both models incorporate user-friendly controls, including easy-to-read pressure gauges and quick-connect air fittings. Safety features, such as thermal overload protection, enhance the durability and longevity of the units during prolonged use. The lightweight nature and rugged build of both compressors ensure that they can withstand job site conditions while maintaining performance.

In conclusion, the DeVilbiss D28921 and WD1600E models offer exceptional performance and reliability for users in need of air compressors. With their advanced technologies, user-centric features, and portability, these compressors are ideal solutions for a variety of tasks, whether in a garage or on a job site. As a product of DeVilbiss Air Power Company, they encapsulate the brand’s commitment to quality and innovation in the air power industry.
Top Page Image Contents