Briggs & Stratton 10000 Watt manual

Page 5

warning

Generator produces hazardous voltage.

Failure to properly ground generator can result in electrocution.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

•When using generator for backup power, notify utility company.

•DO NOT touch bare wires or receptacles.

•DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

•DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

•If you must work around a unit while it is operating, stand on an insulated dry surface to reduce shock hazard.

•DO NOT allow unqualified persons or children to operate or service generator.

•In case of an accident caused by electrical shock, immediately shut down the source of electrical power and contact the local authorities. Avoid direct contact with the victim.

•Despite the safe design of the home generator, operating this equipment imprudently, neglecting its maintenance or being careless can cause possible injury or death.

•Remain alert at all times while working on this equipment. Never work on the equipment when you are physically or mentally fatigued.

•Before performing any maintenance on the generator, disconnect the battery cable indicated by a NEGATIVE, NEG or (-)first. When finished, reconnect that cable last.

•After your home generator is installed, the generator may crank and start without warning any time there is a power failure. To prevent possible injury, always set the generator’s system switch to OFF, remove the service disconnect from the disconnect box AND remove the 15 Amp fuse BEFORE working on the equipment.

warning

Propane and Natural Gas are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

•Install the fuel supply system according to applicable fuel-gas codes.

•Before placing the home generator into service, the fuel system lines must be properly purged and leak tested.

•After the generator is installed, you should inspect the fuel system periodically.

•NO leakage is permitted.

•DO NOT operate engine if smell of fuel is present or other explosive conditions exist.

•DO NOT smoke around the generator. Wipe up any oil spills immediately. Ensure that no combustible materials are left in the generator compartment. Keep the area near the generator clean and free of debris.

warning

Hazardous Voltage

Contact with power lines can cause electric shock or burn.

Lifting Hazard / Heavy Object

Can cause muscle strain or back injury.

•If lifting or hoisting equipment is used, DO NOT contact any power lines.

•DO NOT lift or move generator without assistance.

•DO NOT lift unit by roof as damage to generator will occur.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Watt Home Generator System Date of Purchase Generator Where to Find UsEngine Model Number Model Revision Serial NumberTable of Contents BRIGGSandSTRATTON.COM Safety RulesHazard Symbols and Meanings Page Never operate generator without protective housing or covers Installation General Location Guidelines Home Generator LocationGenerator Location Fuel and Electrical Inlet Locations Access CoversLifting the Generator Gaseous Fuel SystemBRIGGSandSTRATTON.COM LP Vapor Natural Fuel ConsumptionNatural Gas LP Vapor Pole Connector Plug System Connectors+12 Volt DC, .5 Amp Output Internal power supply Transfer Switch Communication Use TxRx and TxRxGenerator AC Connection System Fault Detection SystemGrounding the Generator Utility Circuit ConnectionFuel Supply System Final Installation ConsiderationsFuel System Selection Initial Start-up No LoadControls Engine AdjustmentOperation Automatic Operation SequenceInstallation Inspection Setting Exercise TimerWatt Fecha de compra Generador Dónde encontrarnosMotor Número de Modelo Revisión Número de SerieInstalación Instrucciones importantes de seguridadMandos Utilización Símbolos de Peligro y SignificadosSímbolos de Peligro y Significados Conserve estas instruccionesAte para arriba el pelo largo y quite la joyería Tensión peligrosaNo modifique al generador en ninguna forma Instala el fusible se puede producir el arranque del motorInstalación Pautas Generales para la Ubicación del Generador Ubicación del Sistema de Generador de DomésticoUbicación del Generador Elevación del Generador Dimensiones de la Entrada para Electricidad y CombustibleSistema de combustible gaseoso Puertas de AccesoPara desmontar el techo Para desmontar la puerta de accesoSe debe contar también con una abertura para manómetro Consumo de Combustible Dimensiones de la Cañería de CombustibleGas Natural Vapor de PL Vapor de GasCableado para toma bipolar Conexiones de SistemaSalida de +12 V CC y 0,5 a Fuente de alimentación interna Cableado para toma de 10 polosConexión a Tierra del Generador Sistema de Conexión de c.a. del GeneradorInterconexiones del Circuito de Control Sistema de Detección de FallasSistema de Suministro de Combustible Consideraciones finales para la instalaciónSelección del Sistema de Combustible Aceite de MotorAjuste del Motor Arranque inicial sin cargaInstale el fusible de 15 Amperios en el panel de control 62,5 HzUtilización MandosSecuencia de operación automática Temporizador de enfriamiento del motorInspección posterior a la instalación Configuración del temporizador de prácticaManuel d’Installation et Démarrage Date d’achat Génératrice Où nous trouverMoteur Numéro de modèle Révision Numéro de sérieDirectives de sécurité importantes Commandes FonctionnementSymboles de Danger et Moyens Directives de sécurité importantes Symboles de Danger et MoyensSécurité Certains composants de ce produit ainsi que lesTension dangereuse Avis Description de l’équipement Responsabilités de l’InstallateurResponsabilités de l’Acheteur Précautions Lors du DéballageDirectives Générales Concernant l’Emplacement Emplacement du Génératrice d’état d’AttenteInstallez l’unité à l’extérieur Seulement Dégagement Autour de la GénératriceSoulèvement de la Génératrice Portes d’Accès Pour installer la porte d’accès et le toitLe système de combustible gazeux Pour enlever le toit’un manomètre. Afin de s’assurer que le moteur reçoit Est disponible à votre centre de service localLa pression de carburant adéquate pour fonctionner De raccord de combustible, où a représente l’alimentationPropane Gaz Consommation de CombustibleGas Naturel Vapeur PL Connexions de système Tableau de Commande du Système Interconnexions du Circuit de CommandeMise à la Masse de la Génératrice Système de Détection des PannesSystème d’Alimentation en Combustible Considérations pour l’installation finaleSélection du Système de Combustible Huile à MoteurRéglez l’interrupteur de système de la génératrice sur Auto Démarrage initial sans chargeRéglage du Moteur Capteur de Prise en Charge de la Tension de Service CommandesFonctionnement Séquence de fonctionnement automatiqueRéglage de la minuterie de cycle d’exercice Vérification installation

10000 Watt specifications

Briggs & Stratton has long been synonymous with quality engines and power products, and their 10,000-watt generator continues to uphold that reputation. This robust generator is designed for both home and professional use, making it suitable for emergency backups and job site applications alike. Its impressive power output is one of its standout features, providing ample electricity to run essential appliances, tools, and electronics during outages or in remote locations.

One of the primary features of the Briggs & Stratton 10,000-watt generator is its durable engine. The generator is equipped with a powerful 420cc OHV engine, which is designed for reliable performance under heavy loads. This engine is built to last, thanks to its rugged construction and reliable cooling system, ensuring optimal performance even during extended operating periods.

An essential characteristic of this generator is its impressive runtime. With a 7-gallon fuel tank, it can run for up to 9 hours at a 50% load, providing an extended period of power without the need for constant refueling. The inclusion of a fuel gauge allows users to check the fuel level easily, ensuring that they remain informed about fuel availability during usage.

The generator comes with an array of outlets, including multiple 120V household outlets, a 120/240V twist-lock outlet, and a USB port, enabling users to connect various devices simultaneously. This range of output options provides versatility for users who may need to power multiple appliances at once, whether it be during a blackout or at a job site.

In terms of technology, the Briggs & Stratton 10,000-watt generator features a self-diagnostic tool that monitors its performance and alerts the user to any potential issues before they become significant problems. This proactive approach to maintenance helps ensure that the generator remains in peak operating condition.

Another notable technology is the integrated idle control feature, which automatically adjusts the engine speed based on the load requirement. This not only improves fuel efficiency but also reduces noise levels, making it less obtrusive during use.

Additionally, the generator features a compact design with sturdy wheels for easy transport. Its durable frame is built to withstand rugged environments, while the folding handles make setup and storage convenient. Overall, the Briggs & Stratton 10,000-watt generator is an excellent choice for those seeking reliable power in various settings, combining strength, efficiency, and user-friendly features.
Top Page Image Contents