Able Planet OL-1747-02 manual Integration Description, Cisco Unity Server

Page 15

Chapter 1 Siemens 9751 9006i DTMF Integration

Integration Description

Cisco Unity Server

•The Dialogic® D/41EPCI™, D/120JCT-LS™, or D/120JCT-Euro™voice cards, installed

•Cisco Unity installed and ready for the integration, as described in the Cisco Unity Installation Guide

•A system key that enables the integration and the appropriate number of voice messaging ports

Integration Description

The Siemens 9751 9006i phone system communicates with the Cisco Unity server by using DTMF sequences. The voice messaging lines from the phone system connect to the analog voice cards in the Cisco Unity server. Figure 1-1shows the required connections.

Figure 1-1 Connections Between the Phone System and Cisco Unity

				55417



Phone system			Cisco Unity server
			Analog lines
			Analog lines

The phone system sends the following information with forwarded calls:

•The extension of the called party

•The extension of the calling party (for internal calls)

Cisco Unity uses this information to answer the call appropriately. For example, a call forwarded to Cisco Unity is answered with the personal greeting of the subscriber. If the phone system routes the call to Cisco Unity without this information, Cisco Unity answers with the opening greeting.

		Siemens 9751 9006i DTMF Integration Guide
		Siemens 9751 9006i DTMF Integration Guide
	OL-1747-02			1-3
	OL-1747-02			1-3

Image 15

Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Audience PurposeOrganization ConventionsConvention Description Document Location Cisco Unity DocumentationViii Ordering Documentation Obtaining DocumentationWorld Wide Web Documentation CD-ROMObtaining Technical Assistance Documentation FeedbackCisco.com Technical Assistance Center Contacting TAC by Using the Cisco TAC WebsiteContacting TAC by Telephone Integration Steps Integration OverviewPhone System RequirementsCisco Unity Server Integration DescriptionProgramming the Phone System Integration FeaturesTo program the phone system for analog ports Parameter Required SettingNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE FPN ParameterConfiguring Cisco Unity for the Integration To confirm that the integration is enabledTransfer Type Usage To enter port settings Switch Parameter Required SettingTo set up the test configuration Testing the IntegrationTo test an external call with release transfer To test an internal call with release transfer To test supervised transfer To set up supervised transfer on Cisco UnityTo return Example Subscriber to the default settings Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To remove the existing AV-Cisco TSP To reinstall the AV-Cisco service providerOL-1747-02 To exit the Cisco Unity software from another computer Exiting the Cisco Unity SoftwareTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Start Cisco Unity To start the Cisco Unity software from another computer Setting Up Cisco Unity to Remap Extension Numbers Remapping Extension Numbers Remapping FeatureTo remap extension numbers Wildcard Result Syntax and ExamplesRule Original Number New Number Phone System Integration Click OK To set the Port assignments in the RegistryOL-1747-02 OL-1747-02