Able Planet OL-1747-02 manual To test an internal call with release transfer

Page 26

Chapter 1 Siemens 9751 9006i DTMF Integration

Testing the Integration

Step 6 Confirm that, after the number of rings that the phone system is set to wait, the call is forwarded to Cisco Unity and that you hear the greeting for Example Subscriber. Hearing the greeting means that the phone system forwarded the unanswered call and the call-forward information to Cisco Unity, which correctly interpreted the information.

Step 7 On the Status Monitor, note the port that handles this call.

Step 8 Leave a message for Example Subscriber and hang up Phone 2.

Step 9 On the Status Monitor, confirm that the state of the port handling the call changes to “Idle.” This state means that the port was successfully released when the call ended.

Step 10 Confirm that the MWI on Phone 1 is activated. The activated MWI means that the phone system and Cisco Unity are successfully integrated for turning on MWIs.

To test an internal call with release transfer

Step 1 From Phone 1, enter the internal pilot number for Cisco Unity.

Step 2 When asked for your password, enter 12345. Hearing the request for your password means that the phone system sent the necessary call information to Cisco Unity, which correctly interpreted the information.

Step 3 Confirm that you hear the recorded voice name for Example Subscriber. Hearing the voice name means that Cisco Unity correctly identified the subscriber by the extension.

Step 4 When asked whether you want to listen to your messages, press 1.

Step 5 After listening to the message, press 3 to delete the message.

Step 6 Confirm that the MWI on Phone 1 is deactivated. The deactivated MWI means that the phone system and Cisco Unity are successfully integrated for turning off MWIs.

Step 7 Hang up Phone 1.

Step 8 On the Status Monitor, confirm that the state of the port handling the call changes to “Idle.” This state means that the port was successfully released when the call ended.

 

Siemens 9751 9006i DTMF Integration Guide

1-14

OL-1747-02

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Purpose AudienceConvention Description OrganizationConventions Cisco Unity Documentation Document LocationViii Documentation CD-ROM Obtaining DocumentationWorld Wide Web Ordering DocumentationCisco.com Obtaining Technical AssistanceDocumentation Feedback Contacting TAC by Using the Cisco TAC Website Technical Assistance CenterContacting TAC by Telephone Integration Overview Integration StepsRequirements Phone SystemIntegration Description Cisco Unity ServerIntegration Features Programming the Phone SystemParameter Required Setting To program the phone system for analog portsNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE Parameter FPNTransfer Type Usage Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Switch Parameter Required Setting To enter port settingsTesting the Integration To set up the test configurationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco Unity To test supervised transferTo return Example Subscriber to the default settings Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager To modify voice port settingsSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To reinstall the AV-Cisco service provider To remove the existing AV-Cisco TSPOL-1747-02 Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software To shut down or restart the Cisco Unity serverClick Start Cisco Unity To start the Cisco Unity software from another computer Remapping Extension Numbers Remapping Feature Setting Up Cisco Unity to Remap Extension NumbersTo remap extension numbers Syntax and Examples Wildcard ResultRule Original Number New Number Phone System Integration To set the Port assignments in the Registry Click OKOL-1747-02 OL-1747-02
Top Page Image Contents