Able Planet OL-1747-02 manual To specify switch settings for the traditional phone system

Page 32

Chapter 2 Dual Phone System Integration

Changing Cisco Unity Administrator Settings

Caution Specify settings for the traditional phone system before specifying settings for Cisco CallManager. You must proceed in this order, or the integration may not work.

2.Specify settings for Cisco CallManager on the IP Switch page. For details, see the “To specify switch settings for Cisco CallManager” section on page 2-5.

3.On the Ports page, assign port ranges to the traditional phone system first, then to CallManager, and adjust settings for the ports assigned to each phone system. For details, see the “To modify voice port settings” section on page 2-5.

4.Select the phone system that subscribers and call handlers use. For details, see the “To select which phone system subscribers and call handlers use” section on page 2-7.

5.Select the phone system that Cisco Unity uses when dialing out to send message notifications. For details, see the “To select which phone system Cisco Unity uses for message notification” section on page 2-7.

Caution If you need to add or remove voice cards or uninstall the voice card software after the dual phone system integration is set up, you must also reinstall the AV-Cisco service provider. Do not reinstall the AV-Cisco service provider until after you have set up the voice cards or reinstalled the voice card software. For more information, see the “Changing the Number of Installed Ports” section on page 2-8.

To specify switch settings for the traditional phone system

Step 1 Go to System > Switch > Switch. The settings for the traditional phone system selected during the Cisco Unity Setup program appear.

Step 2 In the Access Code field, enter the trunk access code that Cisco Unity must dial to transfer calls to Cisco CallManager from the traditional phone system.

The access code is the same number that subscribers on the traditional phone system dial to reach someone on the Cisco CallManager system.

 

Siemens 9751 9006i DTMF Integration Guide

2-4

OL-1747-02

Image 32
Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Purpose AudienceConvention Description OrganizationConventions Cisco Unity Documentation Document LocationViii Obtaining Documentation World Wide WebDocumentation CD-ROM Ordering DocumentationCisco.com Obtaining Technical AssistanceDocumentation Feedback Contacting TAC by Using the Cisco TAC Website Technical Assistance CenterContacting TAC by Telephone Integration Overview Integration StepsRequirements Phone SystemIntegration Description Cisco Unity ServerIntegration Features Programming the Phone SystemParameter Required Setting To program the phone system for analog portsNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE Parameter FPNTransfer Type Usage Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Switch Parameter Required Setting To enter port settingsTesting the Integration To set up the test configurationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco Unity To test supervised transferTo return Example Subscriber to the default settings Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager To modify voice port settingsSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To reinstall the AV-Cisco service provider To remove the existing AV-Cisco TSPOL-1747-02 Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software To shut down or restart the Cisco Unity serverClick Start Cisco Unity To start the Cisco Unity software from another computer Remapping Extension Numbers Remapping Feature Setting Up Cisco Unity to Remap Extension NumbersTo remap extension numbers Syntax and Examples Wildcard ResultRule Original Number New Number Phone System Integration To set the Port assignments in the Registry Click OKOL-1747-02 OL-1747-02