Able Planet OL-1747-02 manual Changing Cisco Unity Administrator Settings, Requirements

Page 31

Chapter 2 Dual Phone System Integration

Changing Cisco Unity Administrator Settings

4.Reinstall the AV-Cisco TSP. See the “To reinstall the AV-Cisco service provider” section on page 2-9.

5.Change the Cisco Unity Administrator settings. See the “Changing Cisco Unity Administrator Settings” section on page 2-3.

Requirements

The dual phone system integration supports configurations of the following components:

•A Cisco Unity system key with the integration type set to “Multiple integrations” and with the appropriate number of voice messaging ports enabled.

•The Cisco Unity server set up and Cisco Unity 3.0(1) or later installed, as described in the Cisco Unity Installation Guide.

•A traditional phone system installed and integrated with Cisco Unity. For details, see the instructions earlier in this integration guide. The traditional phone system (including the voice card software used in the integration) must be installed and integrated with Cisco Unity before Cisco CallManager is integrated.

•Cisco CallManager, version 3.1(1) or later, and the AV-Cisco service provider (TSP) installed and configured. For information about integrating

Cisco Unity with Cisco CallManager and the AV-Cisco service provider, see the PDF of the Cisco CallManager Integration Guide, which is located on the Cisco Unity Documentation compact disc.

Changing Cisco Unity Administrator Settings

After Cisco Unity is installed and the phone systems have been separately integrated, you need to adjust settings on pages in the Cisco Unity Administrator so that Cisco Unity can work with both phone systems.

Follow these steps to set up the dual phone system integration.

1.Specify settings for the traditional phone system on the System > Switch > Switch page. For details, see the “To specify switch settings for the traditional phone system” section on page 2-4.

		Siemens 9751 9006i DTMF Integration Guide
		Siemens 9751 9006i DTMF Integration Guide
	OL-1747-02			2-3
	OL-1747-02			2-3

Image 31

Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Audience PurposeConventions OrganizationConvention Description Document Location Cisco Unity DocumentationViii Ordering Documentation Obtaining DocumentationWorld Wide Web Documentation CD-ROMDocumentation Feedback Obtaining Technical AssistanceCisco.com Technical Assistance Center Contacting TAC by Using the Cisco TAC WebsiteContacting TAC by Telephone Integration Steps Integration OverviewPhone System RequirementsCisco Unity Server Integration DescriptionProgramming the Phone System Integration FeaturesTo program the phone system for analog ports Parameter Required SettingNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE FPN ParameterTo confirm that the integration is enabled Configuring Cisco Unity for the IntegrationTransfer Type Usage To enter port settings Switch Parameter Required SettingTo set up the test configuration Testing the IntegrationTo test an external call with release transfer To test an internal call with release transfer To test supervised transfer To set up supervised transfer on Cisco Unity To return Example Subscriber to the default settings Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To remove the existing AV-Cisco TSP To reinstall the AV-Cisco service providerOL-1747-02 To exit the Cisco Unity software from another computer Exiting the Cisco Unity SoftwareTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Start Cisco Unity To start the Cisco Unity software from another computer Setting Up Cisco Unity to Remap Extension Numbers Remapping Extension Numbers Remapping FeatureTo remap extension numbers Wildcard Result Syntax and ExamplesRule Original Number New Number Phone System Integration Click OK To set the Port assignments in the RegistryOL-1747-02 OL-1747-02