Able Planet OL-1747-02 manual Phone System Integration

Page 47

A P P E N D I X C

Assigning Dialogic Ports for a Dual

Phone System Integration

In a dual phone system integration, Cisco Unity assigns a voice messaging port to the traditional phone system for every port available on the installed voice cards before assigning voice messaging ports to Cisco CallManager. The result is that Cisco Unity may not have enough voice messaging ports remaining to assign to Cisco CallManager.

The maximum number of voice messaging ports are assigned to the traditional phone system in spite of the settings on the Ports page in the System Administrator.

For example, a dual phone system integration might have the following configuration:

•A traditional phone system has a four-port voice card installed.

•Cisco CallManager has six Voice Mail ports set up.

•The Cisco Unity server has a system key enabled for a total of eight ports.

•The Ports page on System Administrator indicates that Ports 1 and 2 are assigned to the traditional phone system and Ports 3 through 8 are assigned to Cisco CallManager.

Even so, Ports 1 through 4 (the total voice card ports) will be assigned to the traditional phone system, and Ports 5 through 6 will be assigned to Cisco CallManager.

If you want to assign fewer than the total voice card ports to the traditional phone system, you must first set the Port assignments on the Ports page of the System Administrator, then perform the following procedure.

		Siemens 9751 9006i DTMF Integration Guide
		Siemens 9751 9006i DTMF Integration Guide
	OL-1747-02			C-1
	OL-1747-02			C-1

Image 47

Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Audience PurposeConvention Description OrganizationConventions Document Location Cisco Unity DocumentationViii Ordering Documentation Obtaining DocumentationWorld Wide Web Documentation CD-ROMCisco.com Obtaining Technical AssistanceDocumentation Feedback Technical Assistance Center Contacting TAC by Using the Cisco TAC WebsiteContacting TAC by Telephone Integration Steps Integration OverviewPhone System RequirementsCisco Unity Server Integration DescriptionProgramming the Phone System Integration FeaturesTo program the phone system for analog ports Parameter Required SettingNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE FPN ParameterTransfer Type Usage Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled To enter port settings Switch Parameter Required SettingTo set up the test configuration Testing the IntegrationTo test an external call with release transfer To test an internal call with release transfer To test supervised transfer To set up supervised transfer on Cisco UnityTo return Example Subscriber to the default settings Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To remove the existing AV-Cisco TSP To reinstall the AV-Cisco service providerOL-1747-02 To exit the Cisco Unity software from another computer Exiting the Cisco Unity SoftwareTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Start Cisco Unity To start the Cisco Unity software from another computer Setting Up Cisco Unity to Remap Extension Numbers Remapping Extension Numbers Remapping FeatureTo remap extension numbers Wildcard Result Syntax and ExamplesRule Original Number New Number Phone System Integration Click OK To set the Port assignments in the RegistryOL-1747-02 OL-1747-02