Able Planet OL-1747-02 manual Nytpe NAT Actcde

Page 18

Chapter 1 Siemens 9751 9006i DTMF Integration

Programming the Phone System

Table 1-2 ADDSCSU Parameter Settings for Answering Ports

Parameter	Required Setting

NYTPE	NAT

ACTCDE	(leave field blank)

HTLNIDX	(leave field blank)

DEVFUNC	EXTVCML

INS	Y

LCRCOSV1	0

LCRCOSV2	0

Step 3 Repeat Step 2 for each remaining SLMA voice messaging port that answers calls.

Step 4 Use the ADDSCSU command to create the first SLMA voice messaging port the sets MWIs. Each voice messaging port that sets MWIs must have the following parameters while the remaining parameters keep their default values.

Table 1-3 ADDSCSU Parameter Settings for MWI Ports

			Parameter	Required Setting

			STNO	<the extension number>

			PEN	<the port equipment number>

			DPLN	0

			ITR	1 (assign the port to an ITR group that can dial subscribers,
				but can’t be dialed by subscribers)

			COS1	<a class of service with only MSCWCAP (message-waiting
				capability)>

			COS2	<a class of service with only MSCWCAP (message waiting
				capability)>

			COSX	(leave field blank)

			PUBSCR	<the PSTN prefix plus the extension number>

			NYTPE	NAT

			ACTCDE	(leave field blank)

		Siemens 9751 9006i DTMF Integration Guide
		Siemens 9751 9006i DTMF Integration Guide
1-6				OL-1747-02
1-6				OL-1747-02

Image 18

Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Purpose AudienceOrganization ConventionsConvention Description Cisco Unity Documentation Document LocationViii Documentation CD-ROM Obtaining DocumentationWorld Wide Web Ordering DocumentationObtaining Technical Assistance Documentation FeedbackCisco.com Contacting TAC by Using the Cisco TAC Website Technical Assistance CenterContacting TAC by Telephone Integration Overview Integration StepsRequirements Phone System Integration Description Cisco Unity ServerIntegration Features Programming the Phone SystemParameter Required Setting To program the phone system for analog portsNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE Parameter FPNConfiguring Cisco Unity for the Integration To confirm that the integration is enabledTransfer Type Usage Switch Parameter Required Setting To enter port settingsTesting the Integration To set up the test configurationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco Unity To test supervised transferTo return Example Subscriber to the default settings Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager To modify voice port settingsSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To reinstall the AV-Cisco service provider To remove the existing AV-Cisco TSPOL-1747-02 Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software To shut down or restart the Cisco Unity serverClick Start Cisco Unity To start the Cisco Unity software from another computer Remapping Extension Numbers Remapping Feature Setting Up Cisco Unity to Remap Extension NumbersTo remap extension numbers Syntax and Examples Wildcard ResultRule Original Number New Number Phone System Integration To set the Port assignments in the Registry Click OKOL-1747-02 OL-1747-02