Able Planet OL-1747-02 manual Siemens 9751 9006i Dtmf Integration Guide

Page 34

Chapter 2 Dual Phone System Integration

Changing Cisco Unity Administrator Settings

Step 2 In the Port Assignments section, indicate the range of ports to be assigned to the traditional phone system. The port range for the traditional phone system is port 1 through x, where x is the number of ports on the installed voice cards. Do not assign more ports to the traditional phone system than the number of ports on the voice cards.

Caution If you assign fewer voice ports to the traditional phone system than are available on the installed voice cards, you must edit the registry for this port range to take effect. Otherwise, all available voice ports on the voice cards are used in the integration regardless of the Port Assignments settings. For information on editing the registry for the port range, see the appendix “Assigning Dialogic Ports for a Dual Phone System Integration.”

Step 3 In the Port Assignments section, indicate the range of ports to be assigned to Cisco CallManager. The port range must begin with the next port after the last port for the traditional phone system. The range for Cisco CallManager is x + 1 through y, where y is the port number of the last port displayed on the Ports page or the number of licensed voice ports on the system key, whichever is lower. The number of ports available for Cisco CallManager is the difference between the number of licensed voice ports on the system key and the number of ports assigned to the traditional phone system.

Step 4 Enter an extension for each port.

Step 5 Specify other settings as appropriate. For each phone system, confirm that an appropriate number of ports are used to answer calls and to dial out for message waiting indicators (MWIs), message notifications, and Media Master recordings by phone.

Step 6 Click the Save icon.

Caution The port range for each phone system must be set as specified in Steps 2 and 3 above. If there is a port range mismatch, Cisco Unity will be unable to answer incoming calls and to dial out.

 

Siemens 9751 9006i DTMF Integration Guide

2-6

OL-1747-02

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Purpose AudienceConventions OrganizationConvention Description Cisco Unity Documentation Document LocationViii Documentation CD-ROM Obtaining DocumentationWorld Wide Web Ordering DocumentationDocumentation Feedback Obtaining Technical AssistanceCisco.com Contacting TAC by Using the Cisco TAC Website Technical Assistance CenterContacting TAC by Telephone Integration Overview Integration StepsRequirements Phone SystemIntegration Description Cisco Unity ServerIntegration Features Programming the Phone SystemParameter Required Setting To program the phone system for analog portsNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE Parameter FPNTo confirm that the integration is enabled Configuring Cisco Unity for the IntegrationTransfer Type Usage Switch Parameter Required Setting To enter port settingsTesting the Integration To set up the test configurationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco Unity To test supervised transferTo return Example Subscriber to the default settings Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager To modify voice port settingsSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To reinstall the AV-Cisco service provider To remove the existing AV-Cisco TSPOL-1747-02 Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software To shut down or restart the Cisco Unity serverClick Start Cisco Unity To start the Cisco Unity software from another computer Remapping Extension Numbers Remapping Feature Setting Up Cisco Unity to Remap Extension NumbersTo remap extension numbers Syntax and Examples Wildcard ResultRule Original Number New Number Phone System Integration To set the Port assignments in the Registry Click OKOL-1747-02 OL-1747-02
Top Page Image Contents