Able Planet OL-1747-02 manual Configuring Cisco Unity for the Integration, Transfer Type Usage

Page 22

Chapter 1 Siemens 9751 9006i DTMF Integration

Configuring Cisco Unity for the Integration

Step 10 Program each phone to forward calls to the pilot number assigned to the voice messaging ports, based on one of the following Cisco Unity call transfer types shown in Table 1-8.

Table 1-8 Call Transfer Types

Transfer Type

Usage

 

 

Release transfer

Program the phone to forward calls to the pilot

(blind transfer)

number when:

 

The extension is busy

 

The call is not answered

 

 

Supervised transfer

Program the phone to forward calls to the pilot

 

number only when the call is not answered.

 

Confirm that call forwarding is disabled when the

 

extension is busy.

 

 

 

 

Configuring Cisco Unity for the Integration

 

 

 

After ensuring that the Cisco Unity server is ready for the integration by

 

 

 

completing the appropriate tasks in the Cisco Unity Installation Guide, perform

 

 

 

the following procedures to confirm that the integration is enabled and to enter the

 

 

 

port settings.

 

 

 

To confirm that the integration is enabled

 

 

 

 

 

 

Step 1

On the Cisco Unity server, go to the Cisco Unity Administrator by doing one of

 

 

 

the following:

 

 

 

In Internet Explorer, go to http://<server name>/web/sa.

 

 

 

Double-click the desktop shortcut to the Cisco Unity Administrator.

 

 

Step 2

Go to System > Licensing > Licensed Features.

 

 

Step 3

In the Integration field, confirm that the setting is Analog for a single phone

 

 

 

system integration or Multiple Integrations for a dual phone system integration.

 

 

Siemens 9751 9006i DTMF Integration Guide

 

 

1-10

 

 

OL-1747-02

 

 

 

 

Image 22
Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Purpose AudienceConventions OrganizationConvention Description Cisco Unity Documentation Document LocationViii Documentation CD-ROM Obtaining DocumentationWorld Wide Web Ordering DocumentationDocumentation Feedback Obtaining Technical AssistanceCisco.com Contacting TAC by Using the Cisco TAC Website Technical Assistance CenterContacting TAC by Telephone Integration Overview Integration StepsRequirements Phone SystemIntegration Description Cisco Unity ServerIntegration Features Programming the Phone SystemParameter Required Setting To program the phone system for analog portsNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE Parameter FPNTo confirm that the integration is enabled Configuring Cisco Unity for the IntegrationTransfer Type Usage Switch Parameter Required Setting To enter port settingsTesting the Integration To set up the test configurationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco Unity To test supervised transferTo return Example Subscriber to the default settings Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager To modify voice port settingsSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To reinstall the AV-Cisco service provider To remove the existing AV-Cisco TSPOL-1747-02 Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software To shut down or restart the Cisco Unity serverClick Start Cisco Unity To start the Cisco Unity software from another computer Remapping Extension Numbers Remapping Feature Setting Up Cisco Unity to Remap Extension NumbersTo remap extension numbers Syntax and Examples Wildcard ResultRule Original Number New Number Phone System Integration To set the Port assignments in the Registry Click OKOL-1747-02 OL-1747-02