Able Planet OL-1747-02 manual Programming the Phone System, Integration Features

Page 16

Chapter 1 Siemens 9751 9006i DTMF Integration

Programming the Phone System

Integration Features

The Siemens 9751 9006i integration with Cisco Unity provides the following features:

Call forward to personal greeting	When an incoming call is routed to an
	unanswered or busy extension, the call is
	forwarded to the voice mail of the subscriber.
	The caller then hears the personal greeting of
	the subscriber and can leave a message.
Message waiting indication	When a message is waiting for a subscriber,
	Cisco Unity notifies the phone system to
	activate the message waiting indicator (MWI)
	on the subscriber’s extension (a lamp or a
	stutter dial tone).

If your phone system uses the CorNet network, all the integration features will be available and will function normally.

Programming the Phone System

If you use programming options other than those supplied in the following procedure, the performance of the integration may be affected.

If you want to remap extension numbers (for example, when multiple subscribers use a single phone, or when multiple extension numbers on a single phone should go to a single subscriber greeting), see Appendix B, “Remapping Extension Numbers.”

Perform one of the following procedures to match the voice connectivity between the phone system and Cisco Unity.

	Siemens 9751 9006i DTMF Integration Guide
1-4	OL-1747-02

Image 16

Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Purpose AudienceConventions OrganizationConvention Description Cisco Unity Documentation Document LocationViii Obtaining Documentation World Wide WebDocumentation CD-ROM Ordering DocumentationDocumentation Feedback Obtaining Technical AssistanceCisco.com Contacting TAC by Using the Cisco TAC Website Technical Assistance CenterContacting TAC by Telephone Integration Overview Integration StepsRequirements Phone SystemIntegration Description Cisco Unity ServerIntegration Features Programming the Phone SystemParameter Required Setting To program the phone system for analog portsNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE Parameter FPNTo confirm that the integration is enabled Configuring Cisco Unity for the IntegrationTransfer Type Usage Switch Parameter Required Setting To enter port settingsTesting the Integration To set up the test configurationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco Unity To test supervised transferTo return Example Subscriber to the default settings Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager To modify voice port settingsSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To reinstall the AV-Cisco service provider To remove the existing AV-Cisco TSPOL-1747-02 Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software To shut down or restart the Cisco Unity serverClick Start Cisco Unity To start the Cisco Unity software from another computer Remapping Extension Numbers Remapping Feature Setting Up Cisco Unity to Remap Extension NumbersTo remap extension numbers Syntax and Examples Wildcard ResultRule Original Number New Number Phone System Integration To set the Port assignments in the Registry Click OKOL-1747-02 OL-1747-02