Able Planet OL-1747-02 manual Type VCE

Page 20

Chapter 1 Siemens 9751 9006i DTMF Integration

Programming the Phone System

Table 1-4 ADDHUNT Parameter Settings

Parameter	Required Setting

TYPE	VCE

AC	<the pilot number of the hunt group>

DPLN	0

STNP	<the extension numbers of the answering voice messaging
	ports>

NAME	CISCO UNITY VOICE MESSAGING

CQMAX	10 (the number of subscribers that may be queued when all
	the ports are busy)

FNA	N

STYPE	CIR (circular hunt group)

Make sure that the phone system sends calls only to Cisco Unity voice ports that are set to Answer Calls on the System > Ports page in the Cisco Unity Administrator. Calls sent to a voice messaging port not set to Answer Calls cannot be answered by Cisco Unity and may cause other problems.

Step 7 Go to menu 1.1 - System Parameters and set the following parameters.

Table 1-5 Menu 1.1 - System Parameter Settings

Parameter	Required Setting

Type of PBX VPMOD is on	2	- Other

Number of digits in an	(leave field blank)
extension (Used for MWI)

Sender ID used for Telephone	2	- Calling Party if Known
Answering Messages

ACP Used for Integration	N

	Siemens 9751 9006i DTMF Integration Guide
1-8	OL-1747-02

Image 20

Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Purpose AudienceConvention Description OrganizationConventions Cisco Unity Documentation Document LocationViii Obtaining Documentation World Wide WebDocumentation CD-ROM Ordering DocumentationCisco.com Obtaining Technical AssistanceDocumentation Feedback Contacting TAC by Using the Cisco TAC Website Technical Assistance CenterContacting TAC by Telephone Integration Overview Integration StepsRequirements Phone SystemIntegration Description Cisco Unity ServerIntegration Features Programming the Phone System Parameter Required Setting To program the phone system for analog portsNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE Parameter FPNTransfer Type Usage Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Switch Parameter Required Setting To enter port settingsTesting the Integration To set up the test configurationTo test an external call with release transfer To test an internal call with release transfer To set up supervised transfer on Cisco Unity To test supervised transferTo return Example Subscriber to the default settings Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To specify switch settings for Cisco CallManager To modify voice port settingsSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To reinstall the AV-Cisco service provider To remove the existing AV-Cisco TSPOL-1747-02 Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerStarting the Cisco Unity Software To shut down or restart the Cisco Unity serverClick Start Cisco Unity To start the Cisco Unity software from another computer Remapping Extension Numbers Remapping Feature Setting Up Cisco Unity to Remap Extension NumbersTo remap extension numbers Syntax and Examples Wildcard ResultRule Original Number New Number Phone System Integration To set the Port assignments in the Registry Click OKOL-1747-02 OL-1747-02