
Chapter 2 Dual Phone System Integration
Changing Cisco Unity Administrator Settings
Step 3 | Adjust other settings as appropriate. For more information about the other settings | |
| on the Switch page, see the online Help in the Cisco Unity Administrator. | |
Step 4 | Click the Save icon, then click OK in the Warning dialog box. | |
|
|
|
| To specify switch settings for Cisco CallManager | |
|
|
|
Step 1 | Go to System > Switch > IP Switch. | |
Step 2 | In the Set Active Switch Type section, enter values as shown in the following | |
| table: |
|
| Table |
|
|
|
|
| Switch Parameter | Required Setting |
|
|
|
| Manufacturer | Cisco |
|
|
|
| Model | CallManager |
|
|
|
| Switch PBX software version | 3.01 or later |
|
|
|
| Integration | TAPI |
|
|
|
Step 3 | Click Set As Active, then click OK in the Warning dialog box. | |
Step 4 | In the Access Code field, enter the trunk access code that Cisco Unity must dial | |
| to transfer calls to the traditional phone system from Cisco CallManager. | |
| The access code is the same number that subscribers on Cisco CallManager dial | |
| to reach someone on the traditional phone system. | |
Step 5 | Click the Save icon, then click OK in the Warning dialog box. | |
|
|
|
| To modify voice port settings |
|
|
|
|
Step 1 | Go to System > Ports. |
|
|
| Siemens 9751 9006i DTMF Integration Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|