Able Planet OL-1747-02 manual Integration Overview, Integration Steps

Page 13

C H A P T E R 1

Siemens 9751 9006i DTMF Integration

Integration Overview

Before performing the following integration steps, confirm that the Cisco Unityserver is ready for the integration by completing the appropriate tasks in the Cisco Unity Installation Guide.

Integration Steps

Follow these steps to set up this integration.

1.Review the system and equipment requirements to confirm that all phone system and Cisco Unity server requirements have been met. See the “Requirements” section on page 1-2.

2.Program the phone system and extensions. See the “Programming the Phone System” section on page 1-4.

3.Configure Cisco Unity for the integration. See the “Configuring Cisco Unity for the Integration” section on page 1-10.

4.Test the integration. See the “Testing the Integration” section on page 1-12.

 

 

Siemens 9751 9006i DTMF Integration Guide

 

 

 

 

 

 

OL-1747-02

 

 

1-1

 

 

 

Image 13
Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Audience PurposeConventions OrganizationConvention Description Document Location Cisco Unity DocumentationViii World Wide Web Obtaining DocumentationDocumentation CD-ROM Ordering DocumentationDocumentation Feedback Obtaining Technical AssistanceCisco.com Technical Assistance Center Contacting TAC by Using the Cisco TAC WebsiteContacting TAC by Telephone Integration Steps Integration OverviewPhone System RequirementsCisco Unity Server Integration DescriptionProgramming the Phone System Integration FeaturesTo program the phone system for analog ports Parameter Required SettingNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE FPN ParameterTo confirm that the integration is enabled Configuring Cisco Unity for the IntegrationTransfer Type Usage To enter port settings Switch Parameter Required SettingTo set up the test configuration Testing the IntegrationTo test an external call with release transfer To test an internal call with release transfer To test supervised transfer To set up supervised transfer on Cisco UnityTo return Example Subscriber to the default settings Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To remove the existing AV-Cisco TSP To reinstall the AV-Cisco service providerOL-1747-02 To exit the Cisco Unity software from another computer Exiting the Cisco Unity SoftwareTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Start Cisco Unity To start the Cisco Unity software from another computer Setting Up Cisco Unity to Remap Extension Numbers Remapping Extension Numbers Remapping FeatureTo remap extension numbers Wildcard Result Syntax and ExamplesRule Original Number New Number Phone System Integration Click OK To set the Port assignments in the RegistryOL-1747-02 OL-1747-02