Able Planet OL-1747-02 manual Syntax and Examples, Wildcard Result

Page 45

Appendix B Remapping Extension Numbers

Syntax and Examples

An .exm file can have only one [Number Mappings] section.

Step 6 Using the wildcards and examples in the following “Syntax and Examples” section, enter one remapping rule on the line. Then press Return. The rule format is:

<original number>, <new number>

The rules cannot include spaces between digits. However, the numbers must be separated by a comma and a single space. Wildcard characters cannot appear at the beginning of a number.

Step 7 For all remaining rules, repeat Step 6.

Step 8 Save and close the .exm file.

Step 9 To remap forwarding numbers, go to the directory

CommServer\IntLib\ExtensionMapping\Forwarding.

Step 10 Perform Steps 3 through 8.

Step 11 For extension remapping to take effect, restart the Cisco Unity software. For more information, see Appendix A, “Exiting and Starting the Cisco Unity Software and Server.”

Syntax and Examples

Table B-1lists the wildcard characters you can use in the .exm files.

Table B-1 Wildcard Characters

Wildcard	Result

*	Matches zero or more digits.

?	Matches exactly one digit. Use ? as a placeholder for a single
	digit.

Table B-2gives examples for the syntax and results of rules in the .exm files.

		Siemens 9751 9006i DTMF Integration Guide
		Siemens 9751 9006i DTMF Integration Guide
	OL-1747-02			B-3
	OL-1747-02			B-3

Image 45

Contents Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Audience PurposeOrganization ConventionsConvention Description Document Location Cisco Unity DocumentationViii World Wide Web Obtaining DocumentationDocumentation CD-ROM Ordering DocumentationObtaining Technical Assistance Documentation FeedbackCisco.com Technical Assistance Center Contacting TAC by Using the Cisco TAC WebsiteContacting TAC by Telephone Integration Steps Integration OverviewPhone System RequirementsCisco Unity Server Integration DescriptionProgramming the Phone System Integration FeaturesTo program the phone system for analog ports Parameter Required SettingNytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE FPN ParameterConfiguring Cisco Unity for the Integration To confirm that the integration is enabledTransfer Type Usage To enter port settings Switch Parameter Required SettingTo set up the test configuration Testing the IntegrationTo test an external call with release transfer To test an internal call with release transfer To test supervised transfer To set up supervised transfer on Cisco UnityTo return Example Subscriber to the default settings Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledSiemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerSiemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To remove the existing AV-Cisco TSP To reinstall the AV-Cisco service providerOL-1747-02 To exit the Cisco Unity software from another computer Exiting the Cisco Unity SoftwareTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Start Cisco Unity To start the Cisco Unity software from another computer Setting Up Cisco Unity to Remap Extension Numbers Remapping Extension Numbers Remapping FeatureTo remap extension numbers Wildcard Result Syntax and ExamplesRule Original Number New Number Phone System Integration Click OK To set the Port assignments in the RegistryOL-1747-02 OL-1747-02