Sanyo HF15000L owner manual Computer Input, Computer System Selection, Automatic Multi-Scan System

Page 36

Computer Input

Computer System Selection

Automatic Multi-Scan System

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 89-91)

Selecting Computer System Manually

PC system can also be selected manually.

PC System Menu

1

Press the MENU button to display the on-screen menu.

Use the Point ed buttons to select Input and then

 

press the Point 8 or the SELECT button.

2

Use the Point ed buttons to select System and then

 

press the Point 8 or the SELECT button.

3

Use the Point ed buttons to select the desired system

 

and then press the SELECT button.

Selected system is displayed.

One of the following messages may appear when:

Auto

-----

Mode 1

SVGA 1

When the projector cannot recognize the connected signal conforming to the provided PC Systems, Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.38, 39).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on pp.80-82.)

The preset system is manually adjusted in the PC adjust menu. The adjusted data can be stored in Mode 1-10 (pp.38, 39).

PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

 

Customized Mode (1-

 

10) set in the PC adjust

PC System Menu

menu (pp.38, 39).

 

 

 

 

 

Systems in this dialog box can be selected.

*Mode 1 and SVGA 1 are examples.

36

Image 36
Contents Model PLC-HF15000L Features and Design Functionally Rich Motor-driven Lens ShiftTable of Contents Safety Precaution To The OwnerSafety Instructions Safety Instructions Air CirculationInstalling the Projector in Proper Directions Upward projection, doNot tilt the projector over Degrees right and leftMoving the Projector Transporting the ProjectorCompliance Federal Communications Commission NoticeCanadian Radio Interference Regulations 4Adjustable Feet 5Air Intake Vent Part Names and FunctionsFront Back BottomTerminals and Connectors Part Names and FunctionsSide Control and Indicators Side ControlIndicators Lamp 1/2/3/4 Replace indicatorsSignal Emission indicator Timer button9IMAGE Adjust button STAND-BY buttonRemote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Remote Control Codes Installation Lens InstallationPicture Level and Pitch Adjustment Positioning ProjectorInstallation Lens Shift AdjustmentReplacement of Terminal Terminals of ProjectorConnecting to Computer Cables used for connectionConnecting to Video Equipment Professional Digital VCRAttaching the Cable Tie To loosen the cable tieConnecting the AC Power Cord Power cord clampProjector side For the U.KBasic Operation Turning On the ProjectorWhat is PIN code? Basic OperationTurning Off the Projector Basic Operation How to Operate the On-Screen Menu Basic Operation Main Menu Basic Operation Operating with Projector Control Basic Operation Operating with Remote Control INFO. button Timer button Light buttonFreeze button Filter buttonBasic Operation Keystone Correction StandardCorner correction Press the Point 8 buttonRemote Control Operation Input SelectionDirect Operation Side ControlInput Selection Computer Input Source Selection Menu OperationInput Selection Video Input Source Selection RGBScartRgbpc digital VideoComputer Input Computer System SelectionAutomatic Multi-Scan System Selecting Computer System ManuallyComputer Input Auto PC Adjustment Menu. Use the Point ed buttons to select PC adjustTo store the adjusted parameters Direct OperationComputer Input Manual PC Adjustment Reset Mode freeComputer Input StoreImage select Standard RealDynamic ImageComputer Input Image Adjustment Image Adjust MenuContrast BrightnessColor temp White balance RedWhite balance Green White balance BlueOffset Red/Green/Blue Auto picture controlAdvanced color SharpnessComputer Input Screen Size Adjustment Custom adj Digital zoom +Digital zoom Keystone Corner correctionCorner pattern CeilingVideo Input Video System SelectionPicture level adjusted with fine tone Video InputUse the Point ed buttons to select Image select Image select menu StandardVideo Input Image Adjustment ColorTint Offset Red/Green/Blue Noise reduction ProgressiveConfirmation box appears and then select Yes Screen Size Adjustment Natural wideChoose a Corner pattern mode among Red, White, Blue, and Off Flexible aspect ratioSettings SettingsLamp mode BackgroundProjects a blue background Projects a captured imageLamp life control Lamp intervalPicture in Picture Display position setting screen Set the Frame Lock to Main picture or Sub pictureEdge blending Color matchingAdvanced color matching Measured information Test pattern Advanced color matchingHdmi setup Logo Logo and Logo PIN code lock settingsLogo select CaptureChange the Logo PIN code lock setting Logo PIN code lockChange Logo PIN code To enter a Logo PIN code lock To change the Logo PIN codeSelect a remote control code in this Setting Menu To change the code for the remote controlFilter control Fan controlPower management Timer left before Lamp is offRC sensor Direct onSecurity Key lock and PIN code lock Key lockPIN code lock To change the PIN code lock setting To enter a PIN codeTo change PIN code To change the PIN codeProjector ID ShutterVideo delay control Closed captionFilter counter Appear at turning on and selecting input sourceTimer Factory defaultHow To Overlap the Projection Images How to Overlap the Projection Images on a ScreenHow to Overlap the Projection Images Color matchingMaintenance and Care Maintaining the AMC unitMaintenance and Care Replacing the FiltersMaintenance and Care Resetting the Filter Counter Lamp Management Lamp Replacement Lamp Handling Precautions Cleaning the Projection Lens Cleaning the Projector CabinetIndicators Then check the matters belowTroubleshooting AppendixAppendix Appears on the screenShutter does not Menu Tree Computer Input/HDMI Input/Video InputComputer Input Hdmi Input/Video Input Video InputSetting Indicators and Projector Condition IndicatorsTemperature inside the projector is elevated Temperature inside the projector is abnormallyTemperature returns to normal, the Power Indicator lights green and the projector can beIf the Filter counter reached a time set in the timer Setting, the icon as shown in appears onScreen and the Warning Filter indicator on Timer setting, the icon shown in appears onCompatible Computer Specifications DisplaySvga Supported Signal Format for Optional Board Dual Link SDI Board POA-AMD22SDIDLBNC, S Board POA-AMD25VD3 Technical Specifications Optional Parts PJ Link NoticeConfigurations of Terminals Control Port Connector D-sub 9 pinAnalog TERMINALMini D-sub 15 pin USB PORTSeries B Hdmi TERMINAL19 pin Type aPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Unit mm inchList of Picture in Picture Serial Control Interface ExampleFormat Status Read Commands KL8A