Sanyo HF15000L owner manual Maintenance and Care, Maintaining the AMC unit

Maintenance and Care

Maintaining the AMC unit

1	Press the ON/STAND-BY button on the side control
	or the STAND-BY button on the remote control, flip
	the Main On/Off Switch off, and then unplug the AC
	power cord from the AC outlet.
2	Remove the dust on the projector and air vents.
3	Loosen the 2 screws that secure the AMC unit and
	pull it out.
4	Overturn the AMC unit and loosen the 2 screws that
	secure the filter cleaning unit.
5	After opening the filter cleaning unit cover, take out
	the dust bin from the filter cleaning unit, empty the
	dust bin by discarding the dust into a trash bin or
	carefully sucking up the dust with a vacuum cleaner,
	clean the brush, place back the dust bin, and then
	close the cover.
6	Place the AMC unit back into the projector and fix it
	with the 2 screws.
7	Plug the power cord and power on the projector.

3

AMC unit

Screws

AMC unit

4 Filter cleaning unit

		Screws
5	Filter cleaning	Brush
	unit cover

Dust bin Mesh filter

✔Note:

•Do not reset the filter counter if the filters were not replaced.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments may cause a poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. Such condition may degrade the quality of the projected image.

When the symptoms above are noticed, contact your authorized dealer or service center for proper cleaning.

Close the dust tray slowly and dispose the dust.

Dust collects here.

Dust tray

When you suck up the dust with a vacuum cleaner, use a crevice tool.

72