Sanyo HF15000L Temperature inside the projector is elevated, Close to the abnormally high level

Appendix

The projector is detecting abnormal condition.

			Indicators						Projector Condition
POWER	LAMP	WARNING		WARNING		SHUTTER		LAMP
green	red		TEMP.		FILTER		blue	REP.
			red		orange			orange
					✽		✽	✽	The temperature inside the projector is elevated
									close to the abnormally high level.
									The temperature inside the projector is abnormally
									high. The projector cannot be turned on. When
									the projector is cooled down enough and the
					✽		✽	✽	temperature returns to normal, the POWER
									indicator lights green and the projector can be
									turned on. (The WARNING TEMP. indicator keeps
									blinking.)
									The projector has been cooled down enough and
					✽		✽	✽	the temperature returns to normal. When turning on
									the projector, the WARNING TEMP. indicator stops
									blinking. Check and replace the filter.
									The lamp won’t light up. (The projector is preparing
					✽		✽		for stand-by or the projection lamp is being cooled
									down. The projector cannot be turned on until
									cooling is completed.)
									The lamp won’t light up. (The lamp has been cooled
									down enough and the projector is in stand-by mode
					✽		✽		and ready to be turned on with the ON/STAND-BY
									button.)
									One of the lamps failed. As the lamps are too hot to
✽	✽		✽		✽		✽		replace the lamp safely, the lamps are being cooled
									down.
									The lamps has been cooled down so that you can
✽	✽		✽		✽		✽		replace the lamp safely. To find out which lamp fails,
									check the LAMP 1/2/3/4/ REPLACE indicators on top
									of the projector (p.76)
									One of the lamps has been operated for more than
✽	✽		✽		✽		✽		the total lamp operation time which you specified
									for the Lamp interval function (P56).

WARNING FILTER

When the filter detects clogging, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter with a new one promptly. Reset the Filter counter. (p.74).

87