Sanyo HF15000L owner manual Timer, Factory default

Settings

P-timer

This function allows you to change the presentation of the P-

timer and execute it.		P-TIMER
Select one of the following options:
Count up	The P-timer display 000:00 appears on
	the screen and the count starts (000:00–
	180:00)
Count down	The time set in the Timer setting appears
	on the screen and the countdown starts.
Timer	Use the Point ed buttons to set the
	Timer (1–180 Min). Only set to Count
	down, Timer is active. Factory default
	value is 10 Min.
Start	Executes the count up or count down
	function. Press the SELECT button at
	Start, Start changes to Stop in the Screen
	Menu. At that time, press the SELECT
	button at Stop to stop Count up or Count
	down, and Stop changes to Restart in the
	Screen Menu. Press the SELECT button
	at Restart to resume Count up or Count
	down.
Reset	Resets the P-timer values. Press the
	SELECT button at Reset to return to the
	following value;
	Count up ...	"000:00"
	Count down	... Timer that you set
Exit	To exit the P-timer operation.

Stop or Cancel the P-timer via Remote Control To stop the P-timer, press the P-TIMER button.

To cancel the P-timer, press and hold the P-TIMER button for a few seconds.

Test pattern

Various test pattern are available for use when setting up the projector.

Factory default

This function returns all setting values except for User logo, PIN code lock, Logo PIN code lock, Filter counter and Network setting to the factory default settings.

69