Sanyo HF15000L owner manual Projector ID, Shutter

Page 66

Settings

Projector ID

This feature allows users to set serial communication configuration (Projector ID) when several projectors are connected via the RS-232C terminal (serial port) of the projector.

Use the Point ed buttons to adjust the Projector ID.

Projector ID ... 1 - 999. (Factory default setting : Projector ID 1)

Shutter

Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.

Protection

Prohibits the shutter operation from the remote control and the projector's side control.

Remote control. . Selecting "On" prohibits the shutter operation from the remote control.

Projector . . . . . Selecting "On" prohibits the shutter operation from the side control.

It is possible to prohibit the shutter operation from both of the remote control and the side control.

Effect

Choose the image effect at opening or closing the shutter from the following options.

Off

Disable.

L1

The Image will fade in and out at opening or

 

closing the shutter.

L2

The Image will fade in and out more slowly

 

compared with L1.

Release key

Choose the active buttons to release the shutter when the shutter is closed from the following options.

Any

By pressing any buttons on the remoter control

 

and the side control when the shutter is closed,

 

the shutter will be released.

SHUTTER...

Only the SHUTTER button on the remote control

 

and the side control can be released the shutter

 

when the shutter is closed.

 

Only the following buttons are active when the

 

shutter is closed;

 

- INPUT button and INPUT 1/2/3/4 button

 

- ON/STAND-BY button

Management

The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 480 minutes. When the count-down time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down. The SHUTTER indicator is blinking blue during this cooling-off period. When the lamp has been fully cooled down, the POWER indicator turns green lighting and the SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the SHUTTER indicator turns off.

66

Image 66
Contents Model PLC-HF15000L Features and Design Functionally Rich Motor-driven Lens ShiftTable of Contents Safety Precaution To The OwnerSafety Instructions Safety Instructions Air CirculationNot tilt the projector over Installing the Projector in Proper DirectionsUpward projection, do Degrees right and leftMoving the Projector Transporting the ProjectorCompliance Federal Communications Commission NoticeCanadian Radio Interference Regulations Front 4Adjustable Feet 5Air Intake VentPart Names and Functions Back BottomTerminals and Connectors Part Names and FunctionsSide Control and Indicators Side ControlIndicators Lamp 1/2/3/4 Replace indicators9IMAGE Adjust button Signal Emission indicatorTimer button STAND-BY buttonRemote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Remote Control Codes Picture Level and Pitch Adjustment InstallationLens Installation Positioning ProjectorInstallation Lens Shift AdjustmentReplacement of Terminal Terminals of ProjectorConnecting to Computer Cables used for connectionConnecting to Video Equipment Professional Digital VCRAttaching the Cable Tie To loosen the cable tieProjector side Connecting the AC Power CordPower cord clamp For the U.KBasic Operation Turning On the ProjectorWhat is PIN code? Basic OperationTurning Off the Projector Basic Operation How to Operate the On-Screen Menu Basic Operation Main Menu Basic Operation Operating with Projector Control Basic Operation Operating with Remote Control INFO. button Freeze button Timer buttonLight button Filter buttonCorner correction Basic Operation Keystone CorrectionStandard Press the Point 8 buttonDirect Operation Remote Control OperationInput Selection Side ControlInput Selection Computer Input Source Selection Menu OperationRgbpc digital Input Selection Video Input Source SelectionRGBScart VideoAutomatic Multi-Scan System Computer InputComputer System Selection Selecting Computer System ManuallyTo store the adjusted parameters Computer Input Auto PC AdjustmentMenu. Use the Point ed buttons to select PC adjust Direct OperationComputer Input Manual PC Adjustment Computer Input ResetMode free StoreDynamic Image select StandardReal ImageContrast Computer Input Image AdjustmentImage Adjust Menu BrightnessWhite balance Green Color tempWhite balance Red White balance BlueAdvanced color Offset Red/Green/BlueAuto picture control SharpnessComputer Input Screen Size Adjustment Custom adj Digital zoom +Digital zoom Corner pattern KeystoneCorner correction CeilingVideo Input Video System SelectionUse the Point ed buttons to select Image select Picture level adjusted with fine toneVideo Input Image select menu StandardVideo Input Image Adjustment ColorTint Offset Red/Green/Blue Noise reduction ProgressiveConfirmation box appears and then select Yes Screen Size Adjustment Natural wideChoose a Corner pattern mode among Red, White, Blue, and Off Flexible aspect ratioSettings SettingsProjects a blue background Lamp modeBackground Projects a captured imageLamp life control Lamp intervalPicture in Picture Display position setting screen Set the Frame Lock to Main picture or Sub pictureEdge blending Color matchingAdvanced color matching Measured information Test pattern Advanced color matchingLogo select Hdmi setupLogo Logo and Logo PIN code lock settings CaptureChange Logo PIN code Change the Logo PIN code lock settingLogo PIN code lock To enter a Logo PIN code lock To change the Logo PIN codeFilter control Select a remote control code in this Setting MenuTo change the code for the remote control Fan controlRC sensor Power managementTimer left before Lamp is off Direct onSecurity Key lock and PIN code lock Key lockPIN code lock To change PIN code To change the PIN code lock settingTo enter a PIN code To change the PIN codeProjector ID ShutterVideo delay control Closed captionFilter counter Appear at turning on and selecting input sourceTimer Factory defaultHow To Overlap the Projection Images How to Overlap the Projection Images on a ScreenHow to Overlap the Projection Images Color matchingMaintenance and Care Maintaining the AMC unitMaintenance and Care Replacing the FiltersMaintenance and Care Resetting the Filter Counter Lamp Management Lamp Replacement Lamp Handling Precautions Cleaning the Projection Lens Cleaning the Projector CabinetIndicators Then check the matters belowTroubleshooting AppendixAppendix Appears on the screenShutter does not Menu Tree Computer Input/HDMI Input/Video InputComputer Input Hdmi Input/Video Input Video InputSetting Indicators and Projector Condition IndicatorsTemperature returns to normal, the Power Temperature inside the projector is elevatedTemperature inside the projector is abnormally Indicator lights green and the projector can beScreen and the Warning Filter indicator on If the Filter counter reached a time set in the timerSetting, the icon as shown in appears on Timer setting, the icon shown in appears onCompatible Computer Specifications DisplaySvga Supported Signal Format for Optional Board Dual Link SDI Board POA-AMD22SDIDLBNC, S Board POA-AMD25VD3 Technical Specifications Optional Parts PJ Link NoticeAnalog TERMINALMini D-sub 15 pin USB PORTSeries B Configurations of TerminalsControl Port Connector D-sub 9 pin Hdmi TERMINAL19 pin Type aPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Unit mm inchList of Picture in Picture Serial Control Interface ExampleFormat Status Read Commands KL8A