Computer Input
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press the Point 8 or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the Point 8 or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button.
Mode free
This mode has stored parameters.
✔Note
•Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i , 1080i or 1080p is selected in the PC System Menu (p.36.
•When input computer signal to the projector, PC adjust function will become available.
Values of Total dots, Position H, | Press the SELECT | |
Position V, Display area H and | button to clear the | |
Display area V. |
| stored data. |
Store | No parameters stored | |
Press the MENU button | Press the SELECT button |
to close this dialog box. | to store the data. |
39