Sanyo HF15000L owner manual Color temp, White balance Red, White balance Green, White balance Blue

Page 42

Computer Input

MENU

 

Return to the IMAGE ADJUST Menu. Any settings that

 

have been changed will not be stored. To store the changed

 

settings, be sure to select “LIST” and go to the COLOR

 

MANAGEMENT LIST.

4

In the COLOR MANAGEMENT LIST, the adjusted color data

are checkmarked. You can decide whether or not to apply the

adjusted color data in the list to the projected image (see below).

LIST MODE

Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the SELECT button. The check mark disappears.

COLOR PALETTE

Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared.)

COLOR SELECTION MODE

Level and phase

Gamma

adjustment palette.

adjustment palette.

LIST

COLOR M.

MENU

DEL

 

LIST MODE

Select the DEL box if you want to delete the adjusted data.

 

 

Press the SELECT button and a confirmation box appears and

 

 

then select [Yes].

 

 

ALL DEL

Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes].

MENU

The same function as stated above.

COLOR M.

The same function as stated above.

Color temp.

 

Use the Point 7 8 buttons to select the desired Color temp.

 

level (XLow, Low, Mid or High).

ALL DEL

 

White balance (Red)

 

Press the Point 7 button to lighten red tone; press the Point

8button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63).

White balance (Blue)

Press the Point 7 button to lighten blue tone; press the

Point 8 button to deepen blue tone (from 0 to 63).

COLOR PALETTE

DEL

MENU

COLOR M.

42

Image 42
Contents Model PLC-HF15000L Features and Design Functionally Rich Motor-driven Lens ShiftTable of Contents Safety Precaution To The OwnerSafety Instructions Safety Instructions Air CirculationNot tilt the projector over Installing the Projector in Proper DirectionsUpward projection, do Degrees right and leftMoving the Projector Transporting the ProjectorCompliance Federal Communications Commission NoticeCanadian Radio Interference Regulations Front 4Adjustable Feet 5Air Intake VentPart Names and Functions Back BottomTerminals and Connectors Part Names and FunctionsSide Control and Indicators Side ControlIndicators Lamp 1/2/3/4 Replace indicators9IMAGE Adjust button Signal Emission indicatorTimer button STAND-BY buttonRemote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Remote Control Codes Picture Level and Pitch Adjustment InstallationLens Installation Positioning ProjectorInstallation Lens Shift AdjustmentReplacement of Terminal Terminals of ProjectorConnecting to Computer Cables used for connectionConnecting to Video Equipment Professional Digital VCRAttaching the Cable Tie To loosen the cable tieProjector side Connecting the AC Power CordPower cord clamp For the U.KBasic Operation Turning On the ProjectorWhat is PIN code? Basic OperationTurning Off the Projector Basic Operation How to Operate the On-Screen Menu Basic Operation Main Menu Basic Operation Operating with Projector Control Basic Operation Operating with Remote Control INFO. button Freeze button Timer buttonLight button Filter buttonCorner correction Basic Operation Keystone CorrectionStandard Press the Point 8 buttonDirect Operation Remote Control OperationInput Selection Side ControlInput Selection Computer Input Source Selection Menu OperationRgbpc digital Input Selection Video Input Source SelectionRGBScart VideoAutomatic Multi-Scan System Computer InputComputer System Selection Selecting Computer System ManuallyTo store the adjusted parameters Computer Input Auto PC AdjustmentMenu. Use the Point ed buttons to select PC adjust Direct OperationComputer Input Manual PC Adjustment Computer Input ResetMode free StoreDynamic Image select StandardReal ImageContrast Computer Input Image AdjustmentImage Adjust Menu BrightnessWhite balance Green Color tempWhite balance Red White balance BlueAdvanced color Offset Red/Green/BlueAuto picture control SharpnessComputer Input Screen Size Adjustment Custom adj Digital zoom +Digital zoom Corner pattern KeystoneCorner correction CeilingVideo Input Video System SelectionUse the Point ed buttons to select Image select Picture level adjusted with fine toneVideo Input Image select menu StandardVideo Input Image Adjustment ColorTint Offset Red/Green/Blue Noise reduction ProgressiveConfirmation box appears and then select Yes Screen Size Adjustment Natural wideChoose a Corner pattern mode among Red, White, Blue, and Off Flexible aspect ratioSettings SettingsProjects a blue background Lamp modeBackground Projects a captured imageLamp life control Lamp intervalPicture in Picture Display position setting screen Set the Frame Lock to Main picture or Sub pictureEdge blending Color matchingAdvanced color matching Measured information Test pattern Advanced color matchingLogo select Hdmi setupLogo Logo and Logo PIN code lock settings CaptureChange Logo PIN code Change the Logo PIN code lock settingLogo PIN code lock To enter a Logo PIN code lock To change the Logo PIN codeFilter control Select a remote control code in this Setting MenuTo change the code for the remote control Fan controlRC sensor Power managementTimer left before Lamp is off Direct onSecurity Key lock and PIN code lock Key lockPIN code lock To change PIN code To change the PIN code lock settingTo enter a PIN code To change the PIN codeProjector ID ShutterVideo delay control Closed captionFilter counter Appear at turning on and selecting input sourceTimer Factory defaultHow To Overlap the Projection Images How to Overlap the Projection Images on a ScreenHow to Overlap the Projection Images Color matchingMaintenance and Care Maintaining the AMC unitMaintenance and Care Replacing the FiltersMaintenance and Care Resetting the Filter Counter Lamp Management Lamp Replacement Lamp Handling Precautions Cleaning the Projection Lens Cleaning the Projector CabinetIndicators Then check the matters belowTroubleshooting AppendixAppendix Appears on the screenShutter does not Menu Tree Computer Input/HDMI Input/Video InputComputer Input Hdmi Input/Video Input Video InputSetting Indicators and Projector Condition IndicatorsTemperature returns to normal, the Power Temperature inside the projector is elevatedTemperature inside the projector is abnormally Indicator lights green and the projector can beScreen and the Warning Filter indicator on If the Filter counter reached a time set in the timerSetting, the icon as shown in appears on Timer setting, the icon shown in appears onCompatible Computer Specifications DisplaySvga Supported Signal Format for Optional Board Dual Link SDI Board POA-AMD22SDIDLBNC, S Board POA-AMD25VD3 Technical Specifications Optional Parts PJ Link NoticeAnalog TERMINALMini D-sub 15 pin USB PORTSeries B Configurations of TerminalsControl Port Connector D-sub 9 pin Hdmi TERMINAL19 pin Type aPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Unit mm inchList of Picture in Picture Serial Control Interface ExampleFormat Status Read Commands KL8A