Sanyo HF15000L owner manual Maintenance and Care, Replacing the Filters

Maintenance and Care

Replacing the Filters

1	Press the ON/STAND-BY button on the side control
	or the STAND-BY button on the remote control, flip
	the Main On/Off Switch off, and then unplug the AC
	power cord from the AC outlet.
2	Remove the dust on the projector and air vents.
3	Loosen the 2 screws that secure the AMC unit and
	pull it out.
4	Slide forward a pair of the holders: A and B, loosen the 3
	screws that secure the holders, and remove the holders.
5	After inserting your fingers through the slits and lifting
	the filters on the mesh filter to remove them easily,
	remove the filters one by one, and if necessary, suck up
	the dust accumulated on the mesh filter and the frame
	with a vacuum cleaner.
6	Put the new electrostatic honeycomb filter on the
	mesh filter, the new electrostatic pleated filter on
	the honeycomb filter, the holders on the electrostatic
	pleated filter, respectively, and then fix with the screws.
7	Slide backward the holders until the arrow marks on the
	holders are aligned with those on the AMC unit.
8	Place the AMC unit back into the projector and fix it
	with the 2 screws.
9	Plug the power cord, power on the projector and reset
	the filter counter.

CAUTION

• After cleaning or replacing the filter, insert the AMC unit completely. If not, the projector cannot be turned on.

•Do not put anything into the air vents. Doing so may result in malfunction of the projector.

•Do not wash the filters in water or any other liquid. Otherwise the filters may be damaged.

•When using a vacuum cleaner to remove the dust on the mesh filter, be careful as the filter tears easily.

•When the mesh filter gets too dirty, contact your authorized dealer or service center.

3

4

5

6

AMC unit

Screws

Holder B

Screws Holder A

Slit

Slit

Holder B Holder A

Electrostatic pleated filter

Electrostatic honeycomb filter

ORDER REPLACEMENT FILTER

Replacement filter can be ordered through your dealer. When ordering, give the following information to the dealer.

●Model No. of your projector:

PLC-HF15000L

●Replacement Filters (sold as a set): 610 354 6902 (service parts code) An Electrostatic Pleated Filter

An Electrostatic Honeycomb Filter

73