Examples of connection with a computer

Page 14

Preparations

Examples of connection with a computer

Audio cable

RS-232C cable

RGB cable

Audio out

RGB out RS-232C

CAUTION ►Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector.

►Use the accessory cable or a designated-type cable for the connection. Some cables have to be used with core set. A too long cable may cause a certain picture degradation. Please consult with your dealer for details. For cables that have a core only at one end, connect the core to the projector.

►Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

•Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.

•Secure the screws on the connectors and tighten.

•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

•The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.

•For some RGB signal modes, the optional Mac adapter is necessary.

•Automatically adjustment may not function correctly with some input signals.

•When the image resolution is changed on a computer, depending on an input, automatic adjustment function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original.

It might be recommended to use other CRT or LCD monitors to change the resolution.

Contents EDPJ32 Thank you for purchasing this projectorTrademark acknowledgment User’s Manual - Operating GuideBefore use ContentPower on/off PreparationsTroubleshooting Multifunctional settingsMaintenance Warranty and after-serviceAbout this manual Projector featuresBefore use About contents of package 47, 48 Part namesProjector Remote control Control buttonsPreparations Fastening the lens coverFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter About the ﬁlter cover bottom-up useTabs When put on a table When suspended from the ceiling ArrangementFor 169 screens For 43 screensElevator button Adjusting the projector’s elevatorElevator feet Connecting your devices Examples of connection with a VCR/DVD playerExamples of connection with a computer Example of computer signal About Plug-and-Play capabilityConnecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the powerTurning off the power Temporarily muting the sound Adjusting the volumeOperating POWER INPUT Selecting an input signalSearching an input signal  For no signal 43  For a 169 signalFor a 43 signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the zoom magnifying powerAdjusting the focus  For an RGB signalAdjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen 1. To display a menu Multifunctional settingsUsing the menu function 2. To choose the target menu3 Advanced MENU → EASY MENU 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 1 In the EASY MENU ex. KEYSTONE5. To return to the previous menu 6. To reset4. To operate 7. To close the menuEASY MENU EASY MENU continued Using a test pattern PICTURE menuTo adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM GAIN adjustments mainly affect color intensity on PICTURE menu continuedTo adjust CUSTOM Using the buttons / switches the progress mode IMAGE menu at the frame area of the picture. In such a case, please adjust small IMAGE menu continuedWhen this adjustment is too large, certain degradation may appear Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclinedSCREEN menu the frame may not move for some signals. To restore the screen SCREEN menu continuedAlthough the adjustable range will vary depending on inputs, and MyScreen Lock MESSAGEblinking. Please refer to the section “Turning off the power”.  OPTION menuautomatically. When the time is set to 1 to 99, and when the passed OPTION menu continued continued press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the 50h  100h  200h  300h  TURN OFFMaintenance LampIn the case of replacement by yourself Type number = DT007071 Press the MENU button to display a menu Usual ﬁlter cover Air ﬁlterType number = NJ22642 Filter cover for bottom-up useFilter cover for bottom-up use Caring for the lens Caring for the cabinet and remote controlInside of the projector A note of precaution when cleaning the air ﬁlter TroubleshootingThere is no input signal Related messagesThe projector is in a standby state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in an on stateRegarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be correctedPerform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service SpeciﬁcationsSpeciﬁcations Dimension diagram202 285 33.5