Hitachi EDPJ32 user manual Regarding the indicator lamps continued, In Green

Page 55

Troubleshooting

Regarding the indicator lamps (continued)

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

 

 

 

The cooling fan is not operating.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 20 minutes. After the projector has

In Red

 

 

Turned

Blinking

sufficiently cooled down, please make confirmation

or

off

In Red

that no foreign matter has become caught in the fan,

Lighting

 

 

etc., and then turn the power on again.

In Red

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

 

 

 

please contact your dealer or service company.

 

 

 

 

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

 

 

 

Please turn the power off, and allow the projector to

 

 

 

cool down at least 20 minutes. After the projector has

Blinking

 

 

sufficiently cooled down, please make confirmation of

In Red

Turned

Lighting

the following items, and then turn the power on again.

or

• Is there blockage of the air passage aperture?

off

In Red

Lighting

• Is the air filter dirty?

 

 

In Red

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

• Is the projector used at a highland? Please set FAN

 

 

 

SPEED of the SERVICE item in the OPTION menu to

 

 

 

HIGH, only when the projector is used at a highland.

 

 

 

(45)

 

 

 

There is a possibility that the interior portion

Lighting

Alternative

has become overcooled.

Please use the projector within the usage temperature

In Green

blinking in Red

parameters (5°C to 35°C). After the remedy, reset the

 

 

 

 

 

 

power to ON.

 

 

 

 

 

 

 

It is time to clean the air filter.

 

 

 

Please immediately turn the power off, and clean or

Lighting

Simultaneous

change the air filter referring to the section “Air Filter”.

In Green

blinking in Red

After cleaning or changing the air filter, please be sure

 

 

 

to reset the filter timer. After the remedy, reset the

 

 

 

power to ON.

NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “” (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

ENGLISH

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents User’s Manual - Operating Guide Thank you for purchasing this projectorTrademark acknowledgment EDPJ32Preparations ContentPower on/off Before useWarranty and after-service Multifunctional settingsMaintenance TroubleshootingBefore use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Control buttons Remote controlFastening the lens cover PreparationsTabs About the filter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air filter Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensElevator feet Adjusting the projector’s elevatorElevator button Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT Selecting an aspect ratio For a 169 signalFor a 43 signal  For no signal 43  For an RGB signal Adjusting the zoom magnifying powerAdjusting the focus Using the automatic adjustment featureCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen 2. To choose the target menu Multifunctional settingsUsing the menu function 1. To display a menu1 In the EASY MENU ex. KEYSTONE 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 3 Advanced MENU → EASY MENU7. To close the menu 6. To reset4. To operate 5. To return to the previous menuEASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MESSAGE MyScreen Lockautomatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued 50h  100h  200h  300h  TURN OFF press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the continuedLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Filter cover for bottom-up use Air filterType number = NJ22642 Usual filter coverFilter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens Related messages TroubleshootingThere is no input signal A note of precaution when cleaning the air filterThe projector is in an on state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in a standby stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Specifications Warranty and after-service33.5 Dimension diagram202 285 Specifications
Top Page Image Contents