Hitachi EDPJ32 user manual OPTION menu continued

Page 45

Multifunctional settings

OPTION menu (continued)

Item

 

Description

 

 

 

The filter time is the time counted after the last resetting. It is shown

 

in the OPTION menu as the usage time of the air filter. Performing

 

this item resets the time.

 

 

Pressing the RESET button on the remote control or the button ►

 

on the projector displays a dialog to make sure.

FILTER TIME

To perform reset, point at RESET using the button ▲.

 

FILTER TIME

 

RESET CANCEL

0h.

 

RESET

 

 

CANCEL

•Please reset the filter time only when you have cleaned or replaced the lamp, for a suitable indication about the air filter.

•For the air filter care, please see the section "Air filter". (50)

 

Choosing this item displays the SERVICE menu.

SERVICE

:SELECT

 

Choose an item using the buttons ▲/▼, and

FANSPEED

NORMAL

 

press the button ► or the ENTER button to

AUTO ADJUST

 

 

GHOST

 

 

execute the item.

 

FILTER MESSAGE 100h.

 

 

 

FACTORY RESET EXECUTE

 

FAN SPEED AUTO ADJUST GHOST

 

 

FACTORY RESET FILTER MESSAGE

 

 

 

FAN SPEED

 

 

 

 

Using the buttons ▲/▼ switches the rotation speed of the cooling

 

fans.

 

 

 

 

HIGH NORMAL

FANSPEED

 

 

 

HIGH

 

 

 

 

NORMAL

 

 

SERVICE

The HIGH is the mode for use at highlands etc.

 

 

•Note that the projector is noisier when the HIGH is selected.

•Except for use at highlands, please use setting the NORMAL mode. The HIGH mode may shorten the lifetimes of the lamp.

 

AUTO ADJUST

 

 

Using the buttons ▲/▼ enables or disables the automatic

 

adjustment.

 

 

ENABLE DISABLE

AUTO ADJUST

 

ENABLE

 

 

DISABLE

 

Depending on conditions, such as input image, signal cable to the

 

unit, environment around the unit, etc. the automatic adjustment

 

may not work correctly.

 

(to be continued)

In such a case, please choose DISABLE to disable the automatic

adjustment, and make adjustment manually.

 

ENGLISH

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Trademark acknowledgment Thank you for purchasing this projectorEDPJ32 User’s Manual - Operating GuidePower on/off ContentBefore use PreparationsMaintenance Multifunctional settingsTroubleshooting Warranty and after-serviceProjector features Before useAbout this manual About contents of package Part names Projector47, 48 Control buttons Remote controlFastening the lens cover PreparationsAbout the filter cover bottom-up use TabsFilter cover’s knob Filter cover for bottom-up use with an air filter Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensAdjusting the projector’s elevator Elevator feetElevator button Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Adjusting the volume OperatingTemporarily muting the sound Selecting an input signal Searching an input signalPOWER INPUT For a 43 signal For a 169 signal For no signal 43  Selecting an aspect ratioAdjusting the focus Adjusting the zoom magnifying powerUsing the automatic adjustment feature  For an RGB signalCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen Using the menu function Multifunctional settings1. To display a menu 2. To choose the target menu2 Advanced MENU → One of Advanced menus ex. SETUP menu 3. To choose the target item3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE4. To operate 6. To reset5. To return to the previous menu 7. To close the menuEASY MENU EASY MENU continued PICTURE menu To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOMUsing a test pattern PICTURE menu continued To adjust CUSTOMGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu IMAGE menu continued When this adjustment is too large, certain degradation may appearat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu SCREEN menu continued Although the adjustable range will vary depending on inputs, andthe frame may not move for some signals. To restore the screen MESSAGE MyScreen LockOPTION menu automatically. When the time is set to 1 to 99, and when the passedblinking. Please refer to the section “Turning off the power”.  OPTION menu continued you to clean “REMINDER...” will appear after the timer reaches the press the ENTER button on the remote control or the INPUT buttoncontinued 50h  100h  200h  300h  TURN OFFLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Type number = NJ22642 Air filterUsual filter cover Filter cover for bottom-up useFilter cover for bottom-up use Caring for the cabinet and remote control Inside of the projectorCaring for the lens There is no input signal TroubleshootingA note of precaution when cleaning the air filter Related messagesThe projector is cooling down. A certain error Regarding the indicator lampsThe projector is in a standby state The projector is in an on stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Specifications Warranty and after-service202 285 Dimension diagramSpecifications 33.5
Top Page Image Contents