Adjusting the position

Page 25

- ZOOM +

Operating

Press the POSITION button on the remote control.
1. The “POSITION” indication will appear on the screen.		- ZOOM +
1. The “POSITION” indication will appear on the screen.	-	MENU
	POSITION	MENU

Use the cursor buttons ▲/▼/◄/► to adjust the picture	ENTER
Use the cursor buttons ▲/▼/◄/► to adjust the picture
2. position.

When you want to reset the operation, press the RESET button on the remote control during the operation. To complete this operation, press the POSITION button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

●When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.

ENGLISH

Correcting the keystone distortions

Press the KEYSTONE button on the remote control.	ON
	MAGNIFY	VOLUME
A dialog will appear on the screen to aid you in correcting		MUTE
the distortion.	OFF
the distortion.	- +
	FREEZE	KEYSTONE

Use the cursor buttons ▲/▼ to correct the distortion. To close the dialog and complete this operation, press

the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

●The adjustable range for correction will vary among inputs. For some signals, this function may not work well.

●While setting the WIDE mode for aspect ratio, the correction of keystone distortion is not effective. (23, 36)

Contents Trademark acknowledgment Thank you for purchasing this projectorEDPJ32 User’s Manual - Operating GuidePower on/off ContentBefore use PreparationsMaintenance Multifunctional settingsTroubleshooting Warranty and after-serviceBefore use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Control buttons Remote controlFastening the lens cover PreparationsTabs About the ﬁlter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensElevator feet Adjusting the projector’s elevatorElevator button Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT For a 43 signal For a 169 signal For no signal 43  Selecting an aspect ratioAdjusting the focus Adjusting the zoom magnifying powerUsing the automatic adjustment feature  For an RGB signalCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen Using the menu function Multifunctional settings1. To display a menu 2. To choose the target menu2 Advanced MENU → One of Advanced menus ex. SETUP menu 3. To choose the target item3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE4. To operate 6. To reset5. To return to the previous menu 7. To close the menuEASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MESSAGE MyScreen Lockautomatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued you to clean “REMINDER...” will appear after the timer reaches the press the ENTER button on the remote control or the INPUT buttoncontinued 50h  100h  200h  300h  TURN OFFLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Type number = NJ22642 Air ﬁlterUsual ﬁlter cover Filter cover for bottom-up useFilter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens There is no input signal TroubleshootingA note of precaution when cleaning the air ﬁlter Related messagesThe projector is cooling down. A certain error Regarding the indicator lampsThe projector is in a standby state The projector is in an on stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Speciﬁcations Warranty and after-service202 285 Dimension diagramSpeciﬁcations 33.5