Selecting an input signal, Power Input | Hitachi EDPJ32 specification

Page 22

Operating

Selecting an input signal

1. Press the INPUT button on the projector.

Each time you press the button, the projector switches its input port as below.

RGB  S-VIDEO  VIDEO

1. Press the RGB button on the remote control to select the RGB port.

RGB

1. Press the VIDEO button on the remote control to select an input port for the video signal.

Each time you press the button, the projector switches its video input port as below.

S-VIDEO  VIDEO

POWER

INPUT

VIDEO RGB SEARCH

ASPECT

AUTO BLANK

VIDEO RGB SEARCH

ASPECT

AUTO BLANK

●When the TURN ON is selected to the AUTO SEARCH item in the OPTION menu (44), the projector selects the S-VIDEO port ﬁrst. If no input is detected at the S-VIDEO port, the projector will check the VIDEO port automatically.

Searching an input signal

1. Press the SEARCH button on the remote control.

The projector will begin to check its input ports in order to ﬁnd any input signals.

Then when an input is found, the projector will stop searching and display the image.

If no signal is found, the projector will return to the state selected before the operation.

RGB  S-VIDEO  VIDEO

	VIDEO	RGB SEARCH
-	+
	ASPECT	AUTO BLANK

Contents EDPJ32 Thank you for purchasing this projectorTrademark acknowledgment User’s Manual - Operating GuideBefore use ContentPower on/off PreparationsTroubleshooting Multifunctional settingsMaintenance Warranty and after-serviceBefore use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Remote control Control buttonsPreparations Fastening the lens coverTabs About the ﬁlter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter When put on a table When suspended from the ceiling ArrangementFor 169 screens For 43 screensElevator feet Adjusting the projector’s elevatorElevator button Connecting your devices Examples of connection with a VCR/DVD playerExamples of connection with a computer Example of computer signal About Plug-and-Play capabilityConnecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the powerTurning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT  For no signal 43  For a 169 signalFor a 43 signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the zoom magnifying powerAdjusting the focus  For an RGB signalAdjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen 1. To display a menu Multifunctional settingsUsing the menu function 2. To choose the target menu3 Advanced MENU → EASY MENU 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 1 In the EASY MENU ex. KEYSTONE5. To return to the previous menu 6. To reset4. To operate 7. To close the menuEASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclinedSCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MyScreen Lock MESSAGEautomatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued continued press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the 50h  100h  200h  300h  TURN OFFMaintenance LampIn the case of replacement by yourself Type number = DT007071 Press the MENU button to display a menu Usual ﬁlter cover Air ﬁlterType number = NJ22642 Filter cover for bottom-up useFilter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens A note of precaution when cleaning the air ﬁlter TroubleshootingThere is no input signal Related messagesThe projector is in a standby state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in an on stateRegarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be correctedPerform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service SpeciﬁcationsSpeciﬁcations Dimension diagram202 285 33.5