Filter cover for bottom-up use | Hitachi EDPJ32 instruction

Page 51

Maintenance

6. Position the air ﬁlter and ﬁlter cover into place.

“PUSH” mark

(1)Set an air ﬁlter into place.

Push the points of “PUSH” mark.

(Usual ﬁlter cover)

(2) Interlocking the tabs, snap the cover into place.

(Filter cover for bottom-up use)

ENGLISH

	Tabs	Tabs
7.	Please reposition and reconnect the projector, to return as before. (12~16)
	Then turn the projector on. (19)
8.	Reset the ﬁlter time using the FILTER TIME function in the OPTION menu.
	(45)

(1)Press the MENU button to display a menu.

When the EASY MENU has appeared, please skip the next step (2).

(2)Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press the ► button.

(3)Point at the ”FILTER TIME” using ▼/▲ button, then press the ► button. A dialog will appear.

(4)Press the ▲ button to select “RESET” on the dialog. It performs resetting the ﬁlter time.

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufﬁciently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.

►Use only the air ﬁlter of the speciﬁed type. Do not use the projector with the air ﬁlter and the ﬁlter cover removed. Do not remove the ﬁlter cover and the air ﬁlter in a smoky or dusty place. It could result in a ﬁre and/or malfunction to the projector.

►The air ﬁlter should be cleaned periodically. If the air ﬁlter becomes clogged by dust or the like, internal temperatures rise and could cause a ﬁre, a burn and/or malfunction to the projector.

CAUTION ►Please be careful for the projector not to fall. While the projector is placed lens-side up, hold the projector.

NOTE • Please replace the air ﬁlter when it is damaged or too soiled, and also when you replace the lamp.

•Please reset the ﬁlter time only when you have cleaned or replaced the air ﬁlter, for a suitable indication about the air ﬁlter. (45, 53)

•The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent the internal heat level rising.

Contents User’s Manual - Operating Guide Thank you for purchasing this projectorTrademark acknowledgment EDPJ32Preparations ContentPower on/off Before useWarranty and after-service Multifunctional settingsMaintenance TroubleshootingProjector features Before useAbout this manual About contents of package Part names Projector47, 48 Control buttons Remote controlFastening the lens cover PreparationsAbout the ﬁlter cover bottom-up use TabsFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensAdjusting the projector’s elevator Elevator feetElevator button Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Adjusting the volume OperatingTemporarily muting the sound Selecting an input signal Searching an input signalPOWER INPUT Selecting an aspect ratio For a 169 signalFor a 43 signal  For no signal 43  For an RGB signal Adjusting the zoom magnifying powerAdjusting the focus Using the automatic adjustment featureCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen 2. To choose the target menu Multifunctional settingsUsing the menu function 1. To display a menu1 In the EASY MENU ex. KEYSTONE 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 3 Advanced MENU → EASY MENU7. To close the menu 6. To reset4. To operate 5. To return to the previous menuEASY MENU EASY MENU continued PICTURE menu To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOMUsing a test pattern PICTURE menu continued To adjust CUSTOMGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu IMAGE menu continued When this adjustment is too large, certain degradation may appearat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu SCREEN menu continued Although the adjustable range will vary depending on inputs, andthe frame may not move for some signals. To restore the screen MESSAGE MyScreen LockOPTION menu automatically. When the time is set to 1 to 99, and when the passedblinking. Please refer to the section “Turning off the power”.  OPTION menu continued 50h  100h  200h  300h  TURN OFF press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the continuedLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Filter cover for bottom-up use Air ﬁlterType number = NJ22642 Usual ﬁlter coverFilter cover for bottom-up use Caring for the cabinet and remote control Inside of the projectorCaring for the lens Related messages TroubleshootingThere is no input signal A note of precaution when cleaning the air ﬁlterThe projector is in an on state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in a standby stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Speciﬁcations Warranty and after-service33.5 Dimension diagram202 285 Speciﬁcations