Hitachi EDPJ32 user manual SCREEN menu continued

Page 42

Multifunctional settings

SCREEN menu (continued)

Item

Description

 

Using the buttons ▲/▼ switches the mode for the start up screen.

 

The start up screen is a screen displayed when no signal or an

 

unsuitable signal is detected.

 

MyScreen ORIGINAL TURN OFF

 

MyScreen is a screen you can register as a desired screen. The

START UP

ORIGINAL screen is the existing standard screen. When the TURN

 

OFF is selected, the BLACK screen is used.

 

• To avoid remaining as an afterimage, the MyScreen and the

 

ORIGINAL screens will change to the BLANK screen after several

 

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it

 

will change to the BLACK screen.

 

• For the MyScreen, please refer to the item MyScreen below. About the

 

BLACK and BLANK screens, please refer to the item BLANK. (41)

 

This item functions for capturing the MyScreen of the blank screen

 

and the start up screen. Please execute displaying the input

 

including the picture you want to capture.

1. Choosing this item displays a dialog titled “MyScreen”.

It will ask you if you start capturing the

MyScreen

 

picture from the current screen. Please

Do you start capturing this picture?

 

 

wait for the target picture to be displayed.

ESC , + :NO

ENTER , :YES

 

 

2.Press the ENTER button when the picture is display. The picture will freeze and the frame for

capturing appears. To restore the screen

and return to the previous dialog, press the RESET or ESC button.

 

3. Using the buttons ◄/►/▲/▼adjusts

 

MyScreen

the frame position.

MyScreen

Move the capture area

 

Please move the frame to the position of

as you want.

 

ESC , + :RETURN ENTER , :NEXT

 

the picture which you want to use.

 

 

 

Although the adjustable range will vary depending on inputs, and

 

the frame may not move for some signals. To restore the screen

 

and return to the previous dialog, press the RESET or ESC

 

button.

My Screen

 

4. To start registration, press the ENTER

45%

 

button.

 

•Registration takes several minutes. When the registration is completed, the registered screen and the message “MyScreen registration is finished.” are displayed for several seconds. If the registration failed, the message “A capturing error has occurred. Please try again.” is displayed.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents EDPJ32 Thank you for purchasing this projectorTrademark acknowledgment User’s Manual - Operating GuideBefore use ContentPower on/off PreparationsTroubleshooting Multifunctional settingsMaintenance Warranty and after-serviceProjector features Before useAbout this manual About contents of package Part names Projector47, 48 Remote control Control buttonsPreparations Fastening the lens coverAbout the filter cover bottom-up use TabsFilter cover’s knob Filter cover for bottom-up use with an air filter When put on a table When suspended from the ceiling ArrangementFor 169 screens For 43 screensAdjusting the projector’s elevator Elevator feetElevator button Connecting your devices Examples of connection with a VCR/DVD playerExamples of connection with a computer Example of computer signal About Plug-and-Play capabilityConnecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the powerTurning off the power Adjusting the volume OperatingTemporarily muting the sound Selecting an input signal Searching an input signalPOWER INPUT  For no signal 43  For a 169 signalFor a 43 signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the zoom magnifying powerAdjusting the focus  For an RGB signalAdjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen 1. To display a menu Multifunctional settingsUsing the menu function 2. To choose the target menu3 Advanced MENU → EASY MENU 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 1 In the EASY MENU ex. KEYSTONE5. To return to the previous menu 6. To reset4. To operate 7. To close the menuEASY MENU EASY MENU continued PICTURE menu To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOMUsing a test pattern PICTURE menu continued To adjust CUSTOMGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu IMAGE menu continued When this adjustment is too large, certain degradation may appearat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclinedSCREEN menu SCREEN menu continued Although the adjustable range will vary depending on inputs, andthe frame may not move for some signals. To restore the screen MyScreen Lock MESSAGEOPTION menu automatically. When the time is set to 1 to 99, and when the passedblinking. Please refer to the section “Turning off the power”.  OPTION menu continued continued press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the 50h  100h  200h  300h  TURN OFFMaintenance LampIn the case of replacement by yourself Type number = DT007071 Press the MENU button to display a menu Usual filter cover Air filterType number = NJ22642 Filter cover for bottom-up useFilter cover for bottom-up use Caring for the cabinet and remote control Inside of the projectorCaring for the lens A note of precaution when cleaning the air filter TroubleshootingThere is no input signal Related messagesThe projector is in a standby state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in an on stateRegarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be correctedPerform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service SpecificationsSpecifications Dimension diagram202 285 33.5
Top Page Image Contents