Hitachi EDPJ32 OPTION menu, automatically. When the time is set to 1 to 99, and when the passed

Page 44

Multifunctional settings

OPTION menu

With the OPTION menu, the items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

MENU [RGB]

 

:SELECT

PICTURE

AUTO SEARCH

TURN OFF

IMAGE

AUTO OFF

0min

INPUT

LAMP TIME

0h

SETUP

FILTER TIME

0h

SCREEN

SERVICE

 

OPTION

 

 

EASY MENU

 

 

Item

Description

Using the buttons ▲/▼ turns on/off the automatic signal search function.

TURN ON TURN OFF

When the TURN ON is selected, detecting no signal automatically AUTO SEARCH cycles through input ports in the following order.

RGB S-VIDEO VIDEO

Then when an input is found, the projector will stop searching and display the image.

Using the buttons ▲/▼ adjusts the time to count down to automatically turn the projector off.

 

Long (max. 99 minutes) Short (min. 0 minute = DISABLE)

 

AUTO OFF

AUTO OFF

 

 

ENABLE

DISABLE

 

AUTO OFF

10min.

0min.

 

When the time is set to 0, the projector is not turned off

 

 

 

 

automatically. When the time is set to 1 to 99, and when the passed

 

time with a no-signal or an unsuitable signal reaches at the set

 

time, the projector lamp will go off and the power indicator begins

 

blinking. Please refer to the section “Turning off the power”. (20)

 

The lamp time is the time counted after the last resetting. It is

 

shown in the OPTION menu as the usage time of the lamp.

 

Performing this item resets the time.

 

 

 

Pressing the RESET button on the remote control or the button ►

 

on the projector displays a dialog to make sure.

LAMP TIME

LAMP TIME

To perform reset, point at RESET using the button ▲.

0h.

RESET CANCEL

 

RESET

 

 

CANCEL

 

 

 

•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

•For the lamp replacement, please see the section "Lamp".

(47, 48, 49)

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Thank you for purchasing this projector Trademark acknowledgmentEDPJ32 User’s Manual - Operating GuideContent Power on/offBefore use PreparationsMultifunctional settings MaintenanceTroubleshooting Warranty and after-serviceAbout this manual Projector featuresBefore use About contents of package 47, 48 Part namesProjector Remote control Control buttonsPreparations Fastening the lens coverFilter cover’s knob Filter cover for bottom-up use with an air filter About the filter cover bottom-up useTabs When put on a table When suspended from the ceiling ArrangementFor 169 screens For 43 screensElevator button Adjusting the projector’s elevatorElevator feet Connecting your devices Examples of connection with a VCR/DVD playerExamples of connection with a computer Example of computer signal About Plug-and-Play capabilityConnecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the powerTurning off the power Temporarily muting the sound Adjusting the volumeOperating POWER INPUT Selecting an input signalSearching an input signal For a 169 signal For a 43 signal For no signal 43  Selecting an aspect ratioAdjusting the zoom magnifying power Adjusting the focusUsing the automatic adjustment feature  For an RGB signalAdjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen Multifunctional settings Using the menu function1. To display a menu 2. To choose the target menu3. To choose the target item 2 Advanced MENU → One of Advanced menus ex. SETUP menu3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE6. To reset 4. To operate5. To return to the previous menu 7. To close the menuEASY MENU EASY MENU continued Using a test pattern PICTURE menuTo adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM GAIN adjustments mainly affect color intensity on PICTURE menu continuedTo adjust CUSTOM Using the buttons / switches the progress mode IMAGE menu at the frame area of the picture. In such a case, please adjust small IMAGE menu continuedWhen this adjustment is too large, certain degradation may appear Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclinedSCREEN menu the frame may not move for some signals. To restore the screen SCREEN menu continuedAlthough the adjustable range will vary depending on inputs, and MyScreen Lock MESSAGEblinking. Please refer to the section “Turning off the power”.  OPTION menuautomatically. When the time is set to 1 to 99, and when the passed OPTION menu continued press the ENTER button on the remote control or the INPUT button you to clean “REMINDER...” will appear after the timer reaches thecontinued 50h  100h  200h  300h  TURN OFFMaintenance LampIn the case of replacement by yourself Type number = DT007071 Press the MENU button to display a menu Air filter Type number = NJ22642Usual filter cover Filter cover for bottom-up useFilter cover for bottom-up use Caring for the lens Caring for the cabinet and remote controlInside of the projector Troubleshooting There is no input signalA note of precaution when cleaning the air filter Related messagesRegarding the indicator lamps The projector is cooling down. A certain errorThe projector is in a standby state The projector is in an on stateRegarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be correctedPerform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service SpecificationsDimension diagram 202 285Specifications 33.5
Top Page Image Contents