Hitachi EDPJ32 user manual PICTURE menu continued, Using the buttons / switches the progress mode

Page 35

Multifunctional settings

PICTURE menu (continued)

Item	Description

	Using the buttons ▲/▼ switches the progress mode.
	TV  FILM  TURN OFF
	• This function is performed only for an interlaced signal of a VIDEO
	input, an S-VIDEO input or a component video input of 525i (480i)
PROGRESSIVE	or 625i (576i) signal.
	• When the TV or FILM is selected, the screen image will be sharp.
	The FILM mode can also be used for the 2-3 Pull-Down conversion
	system (not be used for the 2-2 Pull-Down system). But these may
	cause a certain defect (for example, jagged line) of the picture for a
	quick moving object. In such a case, please select the TURN OFF,
	even though the screen image may lose the sharp.
	Choosing a mode of MY MEMORY using the buttons ▲/▼ and then
	pressing the button ► or the ENTER button performs each function.
	LOAD1  LOAD2  LOAD3  LOAD4
	SAVE4 SAVE3  SAVE2  SAVE1
	This projector has 4 numbered memories for adjustment data.
	Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data
MY MEMORY	on the memory whose number corresponds to the command’s
	number, and adjusts the picture automatically depending on the
	data.
	Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current
	adjustment data on the memory whose number corresponds with
	the command’s number.
	• The current adjustment data of the items in the PICTURE menu is
	stored. Except for the adjustment data in the CUSTOM modes for
	the GAMMA (33) and COLOR TEMP items. (34)

ENGLISH

35

Image 35

Contents User’s Manual - Operating Guide Thank you for purchasing this projectorTrademark acknowledgment EDPJ32Preparations ContentPower on/off Before useWarranty and after-service Multifunctional settingsMaintenance TroubleshootingAbout this manual Projector featuresBefore use About contents of package 47, 48 Part namesProjector Control buttons Remote controlFastening the lens cover PreparationsFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter About the ﬁlter cover bottom-up useTabs Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensElevator button Adjusting the projector’s elevatorElevator feet Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Temporarily muting the sound Adjusting the volumeOperating POWER INPUT Selecting an input signalSearching an input signal Selecting an aspect ratio For a 169 signalFor a 43 signal  For no signal 43  For an RGB signal Adjusting the zoom magnifying powerAdjusting the focus Using the automatic adjustment featureCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen 2. To choose the target menu Multifunctional settingsUsing the menu function 1. To display a menu1 In the EASY MENU ex. KEYSTONE 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 3 Advanced MENU → EASY MENU7. To close the menu 6. To reset4. To operate 5. To return to the previous menuEASY MENU EASY MENU continued Using a test pattern PICTURE menuTo adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM GAIN adjustments mainly affect color intensity on PICTURE menu continuedTo adjust CUSTOM Using the buttons / switches the progress mode IMAGE menu at the frame area of the picture. In such a case, please adjust small IMAGE menu continuedWhen this adjustment is too large, certain degradation may appear Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu the frame may not move for some signals. To restore the screen SCREEN menu continuedAlthough the adjustable range will vary depending on inputs, and MESSAGE MyScreen Lockblinking. Please refer to the section “Turning off the power”.  OPTION menuautomatically. When the time is set to 1 to 99, and when the passed OPTION menu continued 50h  100h  200h  300h  TURN OFF press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the continuedLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Filter cover for bottom-up use Air ﬁlterType number = NJ22642 Usual ﬁlter coverFilter cover for bottom-up use Caring for the lens Caring for the cabinet and remote controlInside of the projector Related messages TroubleshootingThere is no input signal A note of precaution when cleaning the air ﬁlterThe projector is in an on state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in a standby stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Speciﬁcations Warranty and after-service33.5 Dimension diagram202 285 Speciﬁcations