Power on/off, Turning on the power | Hitachi EDPJ32 guide

Page 19

Make sure that the power cord is ﬁrmly and correctly connected to the projector and the outlet.

3. Press the STANDBY/ON button on the projector or the remote control.

The projector lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in green.

2. Open the lens cover, and set the power switch to the ON position.

The power indicator will light up in steady orange. Then wait several seconds because buttons may not function for these several seconds.

ENTER

ESCRESET

STANDBY/ON

Power on/off

Turning on the power

LAMP

VIDEO	RGB SEARCH	TEMP	POWER indicator
		TEMP
ASPECT	AUTO BLANK	POWER
MAGNIFY	VOLUME
ON	VOLUME	INPUT
	MUTE	INPUT
OFF	MUTE	STANDBY/ON
FREEZE	KEYSTONE
	- ZOOM +
POSITION	MENU	button
		button

Power switch

ENGLISH

POWER (Steady orange)

POWER (Blinking in green)

POWER (Steady green)

To display the picture, select an input signal according to the section "Selecting an input signal" (22).

WARNING ►When the power is on, a strong light is emitted. Do not look into the lens and openings of the projector.

NOTE • Turn the power on in right order. Please power on the projector prior to the connected devices.

Contents User’s Manual - Operating Guide Thank you for purchasing this projectorTrademark acknowledgment EDPJ32Preparations ContentPower on/off Before useWarranty and after-service Multifunctional settingsMaintenance TroubleshootingBefore use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Control buttons Remote controlFastening the lens cover PreparationsTabs About the ﬁlter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensElevator feet Adjusting the projector’s elevatorElevator button Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT Selecting an aspect ratio For a 169 signalFor a 43 signal  For no signal 43  For an RGB signal Adjusting the zoom magnifying powerAdjusting the focus Using the automatic adjustment featureCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen 2. To choose the target menu Multifunctional settingsUsing the menu function 1. To display a menu1 In the EASY MENU ex. KEYSTONE 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 3 Advanced MENU → EASY MENU7. To close the menu 6. To reset4. To operate 5. To return to the previous menuEASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MESSAGE MyScreen Lockautomatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued 50h  100h  200h  300h  TURN OFF press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the continuedLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Filter cover for bottom-up use Air ﬁlterType number = NJ22642 Usual ﬁlter coverFilter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens Related messages TroubleshootingThere is no input signal A note of precaution when cleaning the air ﬁlterThe projector is in an on state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in a standby stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Speciﬁcations Warranty and after-service33.5 Dimension diagram202 285 Speciﬁcations