Hitachi EDPJ32 user manual IMAGE menu continued

Page 37

Multifunctional settings

IMAGE menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ adjusts the over-scan ratio.

 

Large (It reduces picture) Small (It magnifies picture)

OVER SCAN

• This item can be chosen only for a video signal.

• When this adjustment is too large, certain degradation may appear

 

at the frame area of the picture. In such a case, please adjust small.

 

• The number displayed on the menu during this adjustment is just

 

for your reference, and might not be exact display ratio.

V POSITION

Using the buttons ▲/▼ adjusts the vertical position.

Up Down

 

H POSITION

Using the buttons ▲/▼ adjusts the horizontal position.

Left Right

 

 

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate

 

flicker.

H PHASE

Right Left

 

• This item can be chosen only for an RGB signal or a component

 

video signal (except 525i (480i) and 625i (576i)).

 

Using the buttons ▲/▼ adjusts the horizontal size.

 

Large Small

H SIZE

• This item can be chosen only for an RGB signal.

 

• When this adjustment is excessive, the picture may not be

 

displayed correctly. In such a case, please reset the adjustment by

 

pressing the RESET button during this operation.

ENGLISH

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Trademark acknowledgment Thank you for purchasing this projectorEDPJ32 User’s Manual - Operating GuidePower on/off ContentBefore use PreparationsMaintenance Multifunctional settingsTroubleshooting Warranty and after-serviceBefore use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Control buttons Remote controlFastening the lens cover PreparationsTabs About the filter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air filter Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensElevator feet Adjusting the projector’s elevatorElevator button Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT For a 43 signal For a 169 signal For no signal 43  Selecting an aspect ratioAdjusting the focus Adjusting the zoom magnifying powerUsing the automatic adjustment feature  For an RGB signalCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen Using the menu function Multifunctional settings1. To display a menu 2. To choose the target menu2 Advanced MENU → One of Advanced menus ex. SETUP menu 3. To choose the target item3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE4. To operate 6. To reset5. To return to the previous menu 7. To close the menuEASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MESSAGE MyScreen Lockautomatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued you to clean “REMINDER...” will appear after the timer reaches the press the ENTER button on the remote control or the INPUT buttoncontinued 50h  100h  200h  300h  TURN OFFLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Type number = NJ22642 Air filterUsual filter cover Filter cover for bottom-up useFilter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens There is no input signal TroubleshootingA note of precaution when cleaning the air filter Related messagesThe projector is cooling down. A certain error Regarding the indicator lampsThe projector is in a standby state The projector is in an on stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Specifications Warranty and after-service202 285 Dimension diagramSpecifications 33.5
Top Page Image Contents