SETUP menu

Page 40

Multifunctional settings

With the SETUP menu, the items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	ZOOM	100
IMAGE	KEYSTONE	+0
INPUT	WHISPER	NORMAL
SETUP	MIRROR	NORMAL
SCREEN	VOLUME	16
OPTION
EASY MENU

	Item	Description
	ZOOM	Using the buttons ▲/▼ adjusts the zoom (magnifying power).
	ZOOM	Large  Small
		Large  Small
		Using the buttons ▲/▼ corrects the keystone distortion.
		Upper in the data  Lower in the data
		• The adjustable range for correction will vary among inputs. For
	KEYSTONE	some signals, this function may not work well.
	KEYSTONE	• When the V:INVERT or H&V:INVERT is selected under the
		MIRROR item in the SETUP menu, if the projector screen is inclined
		or angled downward, this function may not work correctly.
		• While setting the WIDE mode for aspect ratio, the correction of
		keystone distortion is not effective. (23, 36)
		Using the buttons ▲/▼ turns off/on the whisper mode.
	WHISPER	NORMAL  WHISPER
	WHISPER	• When the WHISPER is selected, acoustic noise and screen
		• When the WHISPER is selected, acoustic noise and screen
		brightness are reduced.
		Using the buttons ▲/▼ switches the mode for mirror status.
	MIRROR
		NORMAL  H:INVERT  V:INVERT  H&V:INVERT
	VOLUME	Using the buttons ▲/▼ adjusts the volume.
	VOLUME	High  Low
		High  Low

Contents Thank you for purchasing this projector Trademark acknowledgmentEDPJ32 User’s Manual - Operating GuideContent Power on/offBefore use PreparationsMultifunctional settings MaintenanceTroubleshooting Warranty and after-serviceBefore use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Remote control Control buttonsPreparations Fastening the lens coverTabs About the ﬁlter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter When put on a table When suspended from the ceiling ArrangementFor 169 screens For 43 screensElevator feet Adjusting the projector’s elevatorElevator button Connecting your devices Examples of connection with a VCR/DVD playerExamples of connection with a computer Example of computer signal About Plug-and-Play capabilityConnecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the powerTurning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT For a 169 signal For a 43 signal For no signal 43  Selecting an aspect ratioAdjusting the zoom magnifying power Adjusting the focusUsing the automatic adjustment feature  For an RGB signalAdjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen Multifunctional settings Using the menu function1. To display a menu 2. To choose the target menu3. To choose the target item 2 Advanced MENU → One of Advanced menus ex. SETUP menu3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE6. To reset 4. To operate5. To return to the previous menu 7. To close the menuEASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclinedSCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MyScreen Lock MESSAGEautomatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued press the ENTER button on the remote control or the INPUT button you to clean “REMINDER...” will appear after the timer reaches thecontinued 50h  100h  200h  300h  TURN OFFMaintenance LampIn the case of replacement by yourself Type number = DT007071 Press the MENU button to display a menu Air ﬁlter Type number = NJ22642Usual ﬁlter cover Filter cover for bottom-up useFilter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens Troubleshooting There is no input signalA note of precaution when cleaning the air ﬁlter Related messagesRegarding the indicator lamps The projector is cooling down. A certain errorThe projector is in a standby state The projector is in an on stateRegarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be correctedPerform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service SpeciﬁcationsDimension diagram 202 285Speciﬁcations 33.5