Hitachi EDPJ32 user manual Part names, Projector, 47, 48

Page 6

Before use

Part names

Projector

Vent (10) Please do not block and cover the vents.

Focus ring (24) Remote sensor (18)

Speaker

Lens (19, 52)						Elevator button (12)
		Front-Right side				Elevator button (12)
Lens cover (8, 19)		Front-Right side				Elevator foot (12)
Lens cover (8, 19)						Elevator foot (12)
Lamp cover
(47, 48, 49)						Filter cover (9, 50)
Lamp unit is inside.						Air ﬁlter and intake vent
A lamp has a						are inside.
A lamp has a
ﬁnite product life.						Please take care of
Preparation of a						the air ﬁlter to normal
new lamp and early						ventilate.
replacement are	Bottom side
recommended.	Bottom side					Power switch (19, 20)
recommended.
Control buttons (7)
Control buttons (7)						AC inlet (16)
						AC inlet (16)
						Elevator button (12)
						Elevator foot (12)
Ports						Vent (10)
See below.		Rear-Left side				Please do not block and
About connection, please see the						cover the vents.
section“Connecting your devices”.
(13, 14)
RGB port (14, 22)						S-VIDEO port (13, 22)
RGB port (14, 22)
Restart switch (20)						VIDEO port (13, 22)
CONTROL port (14)	CONTROL	RGB	S-VIDEO	VIDEO	AUDIO	AUDIO port (13, 14)
CONTROL port (14)		K
		K
Kensington lock slot		Ports

6

Image 6

Contents EDPJ32 Thank you for purchasing this projectorTrademark acknowledgment User’s Manual - Operating GuideBefore use ContentPower on/off PreparationsTroubleshooting Multifunctional settingsMaintenance Warranty and after-serviceProjector features Before useAbout this manual About contents of package Part names Projector47, 48 Remote control Control buttonsPreparations Fastening the lens coverAbout the ﬁlter cover bottom-up use TabsFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter When put on a table When suspended from the ceiling ArrangementFor 169 screens For 43 screensAdjusting the projector’s elevator Elevator feetElevator button Connecting your devices Examples of connection with a VCR/DVD playerExamples of connection with a computer Example of computer signal About Plug-and-Play capabilityConnecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the powerTurning off the power Adjusting the volume OperatingTemporarily muting the sound Selecting an input signal Searching an input signalPOWER INPUT  For no signal 43  For a 169 signalFor a 43 signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the zoom magnifying powerAdjusting the focus  For an RGB signalAdjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen 1. To display a menu Multifunctional settingsUsing the menu function 2. To choose the target menu3 Advanced MENU → EASY MENU 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 1 In the EASY MENU ex. KEYSTONE5. To return to the previous menu 6. To reset4. To operate 7. To close the menuEASY MENU EASY MENU continued PICTURE menu To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOMUsing a test pattern PICTURE menu continued To adjust CUSTOMGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu IMAGE menu continued When this adjustment is too large, certain degradation may appearat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclinedSCREEN menu SCREEN menu continued Although the adjustable range will vary depending on inputs, andthe frame may not move for some signals. To restore the screen MyScreen Lock MESSAGEOPTION menu automatically. When the time is set to 1 to 99, and when the passedblinking. Please refer to the section “Turning off the power”.  OPTION menu continued continued press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the 50h  100h  200h  300h  TURN OFFMaintenance LampIn the case of replacement by yourself Type number = DT007071 Press the MENU button to display a menu Usual ﬁlter cover Air ﬁlterType number = NJ22642 Filter cover for bottom-up useFilter cover for bottom-up use Caring for the cabinet and remote control Inside of the projectorCaring for the lens A note of precaution when cleaning the air ﬁlter TroubleshootingThere is no input signal Related messagesThe projector is in a standby state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in an on stateRegarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be correctedPerform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service SpeciﬁcationsSpeciﬁcations Dimension diagram202 285 33.5