Easy Menu

Page 31

Multifunctional settings

With the EASY MENU, the items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

EASY MENU

ASPECT	4:3
ZOOM	+0
KEYSTONE	+0
MODE	NORMAL
BRIGHT	+0
CONTRAST	+0

COLOR	+0

TINT	+0

SHARPNESS	+3

WHISPER	NORMAL
MIRROR	NORMAL
RESET	EXECUTE
FILTER TIME	0h
LANGUAGE	ENGLISH

ENGLISH

Go To Advance Menu...

	Item	Description
	ASPECT	Using the buttons ◄/► switches the mode for aspect ratio.
	ASPECT	See the ASPECT item in the IMAGE menu. (36)
		See the ASPECT item in the IMAGE menu. (36)
	ZOOM	Using the buttons ◄/► adjusts the zoom.
	ZOOM	See the ZOOM item in the SETUP menu. (40)
		See the ZOOM item in the SETUP menu. (40)
	KEYSTONE	Using the buttons ◄/► corrects the keystone distortion.
	KEYSTONE	See the KEYSTONE item in the SETUP menu. (40)
		See the KEYSTONE item in the SETUP menu. (40)

Using the buttons ◄/► switches the mode of picture type.

The modes of picture type are combinations of a mode of GAMMA (33) and a mode of COLOR TEMP. (34)

Choose a suitable mode according to the projected source.

NORMAL  CINEMA  DYNAMIC

MODE

NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)

CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)

DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)

•When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is “CUSTOM”.

	BRIGHT	Using the buttons ◄/► adjusts the brightness.
	BRIGHT	See the BRIGHT item in the PICTURE menu. (33)
		See the BRIGHT item in the PICTURE menu. (33)
	CONTRAST	Using the buttons ◄/► adjusts the contrast.
	CONTRAST	See the CONTRAST item in the PICTURE menu. (33)
		See the CONTRAST item in the PICTURE menu. (33)
		Using the buttons ◄/► adjusts the strength of whole color.
	COLOR	See the COLOR item in the PICTURE menu. (34)
		• This item can be chosen only for a video signal.
		Using the buttons ◄/► adjusts the tint.
	TINT	See the TINT item in the PICTURE menu. (34)
		• This item can be chosen only for a video signal.

Contents User’s Manual - Operating Guide Thank you for purchasing this projectorTrademark acknowledgment EDPJ32Preparations ContentPower on/off Before useWarranty and after-service Multifunctional settingsMaintenance TroubleshootingBefore use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Control buttons Remote controlFastening the lens cover PreparationsTabs About the ﬁlter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensElevator feet Adjusting the projector’s elevatorElevator button Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer About Plug-and-Play capability Example of computer signalConnecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/offTurning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT Selecting an aspect ratio For a 169 signalFor a 43 signal  For no signal 43  For an RGB signal Adjusting the zoom magnifying powerAdjusting the focus Using the automatic adjustment featureCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen 2. To choose the target menu Multifunctional settingsUsing the menu function 1. To display a menu1 In the EASY MENU ex. KEYSTONE 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 3 Advanced MENU → EASY MENU7. To close the menu 6. To reset4. To operate 5. To return to the previous menuEASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menuSCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MESSAGE MyScreen Lockautomatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued 50h  100h  200h  300h  TURN OFF press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the continuedLamp MaintenanceType number = DT00707 In the case of replacement by yourself1 Press the MENU button to display a menu Filter cover for bottom-up use Air ﬁlterType number = NJ22642 Usual ﬁlter coverFilter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens Related messages TroubleshootingThere is no input signal A note of precaution when cleaning the air ﬁlterThe projector is in an on state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in a standby stateRegarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defectsPerform picture adjustments by changing the COLOR TEMP, COLOR Speciﬁcations Warranty and after-service33.5 Dimension diagram202 285 Speciﬁcations