
The Toggle patch is a type 4 patch that is used to trigger the scanner to switch from the current image stream (black and white) to the alternative image stream (color/grayscale).
1.Prepare documents with a patch Type 4 before and after any color/ grayscale documents.
2.Configure image processing parameters for all four images. Before enabling the scanner, select only the front and back black and white images to be retrieved.
3.Configure the scanner to alternate both sides when a toggle patch is detected.
4.Start scanning.
Images will begin in black and white and will change to color/grayscale when the first toggle patch is detected. Images will remain color/ grayscale until the next toggle patch is detected. Images of the toggle patch sheet will not be returned to the host unless you also enable patch reading and select the Type 4 patch.
1.Configure image processing parameters for all four images. Before initiating the scanner, select only the front and back
2.Enable Auto Color Detection by choosing Low, Medium, High or Custom.
3.Start scanning.
The scanner will determine if it should return a