Kodak A-61580 manual Defining your print string, Units select Inches, Centimeters or Pixels

Page 92

Defining your print string

Format Template — allows you to define your print string. The

 

maximum amount of characters for the print string is 40 characters

 

(including spaces).

 

Date — if you want to add a date to the print string, select one of the

 

following formats:

 

• Format: MMDDYYYY, DDMMYYYY, or YYYYMMDD.

 

• Delimiter: select one of the following separators: Slash: /,

 

Hyphen: -, Period: . , Blank or none. For example: 08/24/2007,

 

08-24-2007, 08.24.2007 or 08 24 2007 or 08242007 (none).

Counter — if you want to add a Counter to the print string, you can enter one of the following options:

•Initial Value: this value is used to assign the document count for the next document entering the transport and is incremented sequentially by the scanner unless another document count is received from the host. This value is returned in the image header.

•Field Width: used to control the width of the document counter. Values range from 1 to 9.

•Format: the format in which the printed image address appears when printed is defined on the Image Address tab. The printed image address may appear in one of three formats:

-Display Leading Zeros format (e.g., 004.003.002.001)

-Compress Leading Zeros format (e.g., 004. 3. 2. 1)

-Suppress Leading Zeros format (e.g., 004.3.2.1)

NOTE: The format chosen does not effect the fixed field of the image address; it is always displayed and printed in its entirety. In the example above, 004 has been defined as a fixed field.

Top margin — allows you to define the distance from the lead edge before the print string begins. Enter the desired amount in the text box.

NOTE: Printing automatically stops 6.3 mm (1/4-inch) from the trailing edge of the document even if the information has not been completely printed.

Units — select Inches, Centimeters or Pixels.

Font — two different character styles, referred to as Normal and

Large, are available.

Rotations — you can select either 90, 180, 270 or Automatic.

•Automatic — the scanner will analyze each document to determine how it was fed and will rotate the image to the proper orientation.

NOTES:

-There must be a sufficient amount of text on the page for this option to work properly.

-This option is designed to work best with Latin-based characters (e.g., English, Dutch, French, German, Italian, Spanish).

Horizontal print position The horizontal print position is set manually on the scanner. See Chapter 4, The Enhanced Printer and Patch Readers, in the User’s Guide for information on changing the horizontal print position.

A-61580 November 2007

4-17

Page 91 Page 93
Image 92
Page 91 Page 93
Contents Page Introduction About this manualImage outputs FG.jpg Best Practices Scanner setup Error handling Enable scanningDisable scanning Initiate pollingPage Controlling image transfer order Dual stream simplex Dual stream duplexPage Jam and fault recovery Image file storage locations Bar code recognitionImage addressing Image address formatStarting image address Next image addressIndexing schemes Single level indexingTwo level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Electronic color dropout Level rulesControlling print strings Print string formattingResolution = 200 dpi Contrast% = Threshold = Color Filter =Red dropout Red Dropout  Near Complete DropoutGreen Dropout  Complete Dropout Green Dropout  Near Complete DropoutBlue Dropout  Complete Dropout Blue Dropout  Near Complete DropoutImage header information Page Zone processing Original Black and white image Relative CroppingProgrammable keys Patch readingPatch code types Type 3 Patch CodeAdditional Patch Codes Transfer Patch CodeToggle Patch Batching Using the Twain Datasource Installation Overview Terminology and featuresAccessing the Scan Validation toolSelect StartProgramsKodakDocument ImagingScan Validation ToolPage Main Kodak Scanner window Page Information icons Image Settings window Toolbar buttons Preview areaInformation icons Tab Cases you will not have to change options on other tabsPage November None Landscape Degrees Scan as selection of Black and White Image SettingsAdjustments tab Filters Noise None Image NoneEnhancements tab Advanced Image Setup Advanced tab Input document is select Two Sided, One Sided Front, or OnePage Done returns you to the Image Settings window November Content Settings tab SensitivityPage Select Grayscale Select Sides Both Color 24-bit Select Sides Both Black and White 1-bitCreating multiple images for each side of a document Make sure Black and White 1-bit is selectedSelect Sides Both Color 24-bit Select Sides Back Creating different settings for each side of a documentSelect Sides Front Device Settings window Document Feeder Device General tabPaper source Page Device Printer tab Page Date Format Yyyyddd JulianFeed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a Reached. Options are none, Level 1, Level 2, and Level When Count ReachedDevice Batch tab November Device Patch tab As LevelFeature Device OCP tab Creating a new Setting Shortcut Page Page Using the Isis Driver Main Isis Driver windowImage Mode Main tabPage Page Layout tab Image OrientationWhen Fixed to Transport or Relative to Document is selected General optionsColor options SuperiorScanner tab Timeout Power SaverMulti-feed Detection OptionsPage Operations Page Color Content Learn Blank Image Detection Dropout tabColor Dropout Imprinter tab ModeUnits select Inches, Centimeters or Pixels Defining your print stringHyphen -, Period . , Blank or none. For example 08/24/2007 Image Address tab Level 2 Offset Address%2L Batch/Patch tab Batch ControlGo to Level 3 or no action Transport End of Job, Continue and Begin New Batch or noPatch Detection Level 2 or Patch T / Transfer Patch LevelPatch Patch 4/Toggle PatchOCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping
Top Page Image Contents