Kodak A-61580 manual Advanced tab, Input document is select Two Sided, One Sided Front, or One

Page 47

Advanced tab

Input document is — select Two Sided, One Sided - Front, or One

Sided - Back depending on what side(s) you want to configure.

NOTE: The Two Sided and One Sided - Back options are only available for duplex scanner models.

Different settings per side — by default, the settings you select in the TWAIN Datasource apply to both sides of the image. Turn this option on if you want you to select different image processing settings for each side of the document you are scanning. For example, if you want the front side to be color and the rear side to be black and white, first make sure that you have selected the Two Sided option of Input document is, then turn on Different settings per side.

Once you have done this, the Side option on the Image Settings window will no longer be grayed out and you can select different settings for each side.

Now that you have turned on Different settings per side, your selections will apply only to the front side of the document you are scanning. After you have made your selections for the front side, use the Side option to select the back side and then make the settings you want to apply to the back.

NOTE: The Different settings per side option is only available for duplex scanner models.

A-61580 November 2007

3-19

Image 47

Contents Page About this manual IntroductionImage outputs FG.jpg Best Practices Scanner setup Initiate polling Error handlingEnable scanning Disable scanningPage Controlling image transfer order Dual stream duplex Dual stream simplexPage Jam and fault recovery Image address format Image file storage locationsBar code recognition Image addressingSingle level indexing Starting image addressNext image address Indexing schemesTwo level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Print string formatting Electronic color dropoutLevel rules Controlling print stringsRed Dropout  Near Complete Dropout Resolution = 200 dpiContrast% = Threshold = Color Filter = Red dropoutBlue Dropout  Near Complete Dropout Green Dropout  Complete DropoutGreen Dropout  Near Complete Dropout Blue Dropout  Complete DropoutImage header information Page Original Black and white image Relative Cropping Zone processingType 3 Patch Code Programmable keysPatch reading Patch code typesAdditional Patch Codes Transfer Patch CodeToggle Patch Batching Installation Overview Terminology and features Using the Twain DatasourceValidation Tool Accessing the ScanValidation tool Select StartProgramsKodakDocument ImagingScanPage Main Kodak Scanner window Page Information icons Image Settings window Preview area Toolbar buttonsInformation icons Cases you will not have to change options on other tabs TabPage November None Landscape Degrees Scan as selection of Black and White Image SettingsAdjustments tab Image None Filters Noise NoneEnhancements tab Advanced Image Setup Input document is select Two Sided, One Sided Front, or One Advanced tabPage Done returns you to the Image Settings window November Sensitivity Content Settings tabPage Select Grayscale Select Sides Both Black and White 1-bit Select Sides Both Color 24-bitMake sure Black and White 1-bit is selected Creating multiple images for each side of a documentSelect Sides Both Color 24-bit Select Sides Back Creating different settings for each side of a documentSelect Sides Front Device Settings window Document Feeder Device General tabPaper source Page Device Printer tab Page Yyyyddd Julian Date FormatFeed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a Reached. Options are none, Level 1, Level 2, and Level When Count ReachedDevice Batch tab November As Level Device Patch tabFeature Device OCP tab Creating a new Setting Shortcut Page Page Main Isis Driver window Using the Isis DriverMain tab Image ModePage Page Image Orientation Layout tabGeneral options When Fixed to Transport or Relative to Document is selectedSuperior Color optionsScanner tab Options TimeoutPower Saver Multi-feed DetectionPage Operations Page Color Content Learn Blank Image Detection Dropout tabColor Dropout Mode Imprinter tabUnits select Inches, Centimeters or Pixels Defining your print stringHyphen -, Period . , Blank or none. For example 08/24/2007 Image Address tab Level 2 Offset Address%2L Transport End of Job, Continue and Begin New Batch or no Batch/Patch tabBatch Control Go to Level 3 or no actionLevel 2 or Patch T / Transfer Patch Level Patch DetectionPatch 4/Toggle Patch PatchOCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping