Kodak A-61580 manual Generated Automatically

Page 19

Controlling document The previous Indexing Scheme examples illustrated how document

level changeslevels change within a single group of documents. There are four document image levels: 3, 2, 1, and 0.

There are several ways you can set or change the document level:

•You can change image address level on the touchscreen. Touching the appropriate Level button increments the image address level to Level 1, Level 2 or Level 3.

•You can send a new image address from the host PC.

•You can use the Patch Reader; feeding a document containing a particular type of patch can change document levels.

•Starting a new batch can cause the image address level to change depending on the application.

If you do not set or change the document level using one of the methods listed, the document level will be set automatically based upon the level rules (i.e., Level 2 is followed by Level 1, etc.) defined during scanner setup.

The following diagram illustrates how document levels are set or changed:

1				2					3				4					1					2				3
1				2					3									1					2				3







																				Generated Automatically
			Generated Automatically																	Generated Automatically

Level instruction:

Operator selects Level III using the Level icon on the OCP or uses a patch III document (Level II and I documents are generated automatically using the level to follow level rules).

Level Instruction:

Operator selects Level II using the Level icon on the OCP (Level I documents are generated automatically using the level to follow level rules).

										2		3
	1		2		3			1		2		3

Generated Automatically

Level Instruction:

Operator selects Level II using the Level icon on the OCP or uses a patch II document (Level 1 documents are generated automatically using the level to follow level rules).

Generated Automatically

Level Instruction:

Operator selects Level III using the Level icon on the OCP a (Level II and I documents are generated automatically using the level to follow level rules).

Document level information is transmitted in each image header.

A-61580 November 2007

2-15

Image 19

Contents Page About this manual IntroductionImage outputs FG.jpg Best Practices Scanner setup Initiate polling Error handlingEnable scanning Disable scanningPage Controlling image transfer order Dual stream duplex Dual stream simplexPage Jam and fault recovery Image address format Image file storage locationsBar code recognition Image addressingSingle level indexing Starting image addressNext image address Indexing schemesTwo level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Print string formatting Electronic color dropoutLevel rules Controlling print stringsRed Dropout  Near Complete Dropout Resolution = 200 dpiContrast% = Threshold = Color Filter = Red dropoutBlue Dropout  Near Complete Dropout Green Dropout  Complete DropoutGreen Dropout  Near Complete Dropout Blue Dropout  Complete DropoutImage header information Page Original Black and white image Relative Cropping Zone processingType 3 Patch Code Programmable keysPatch reading Patch code typesToggle Patch Transfer Patch CodeAdditional Patch Codes Batching Installation Overview Terminology and features Using the Twain DatasourceValidation Tool Accessing the ScanValidation tool Select StartProgramsKodakDocument ImagingScanPage Main Kodak Scanner window Page Information icons Image Settings window Preview area Toolbar buttonsInformation icons Cases you will not have to change options on other tabs TabPage November None Landscape Degrees Adjustments tab Image SettingsScan as selection of Black and White Image None Filters Noise NoneEnhancements tab Advanced Image Setup Input document is select Two Sided, One Sided Front, or One Advanced tabPage Done returns you to the Image Settings window November Sensitivity Content Settings tabPage Select Grayscale Select Sides Both Black and White 1-bit Select Sides Both Color 24-bitMake sure Black and White 1-bit is selected Creating multiple images for each side of a documentSelect Sides Both Color 24-bit Select Sides Front Creating different settings for each side of a documentSelect Sides Back Device Settings window Paper source Device General tabDocument Feeder Page Device Printer tab Page Yyyyddd Julian Date FormatFeed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a Device Batch tab When Count ReachedReached. Options are none, Level 1, Level 2, and Level November As Level Device Patch tabFeature Device OCP tab Creating a new Setting Shortcut Page Page Main Isis Driver window Using the Isis DriverMain tab Image ModePage Page Image Orientation Layout tabGeneral options When Fixed to Transport or Relative to Document is selectedSuperior Color optionsScanner tab Options TimeoutPower Saver Multi-feed DetectionPage Operations Page Color Content Learn Color Dropout Dropout tabBlank Image Detection Mode Imprinter tabHyphen -, Period . , Blank or none. For example 08/24/2007 Defining your print stringUnits select Inches, Centimeters or Pixels Image Address tab Level 2 Offset Address%2L Transport End of Job, Continue and Begin New Batch or no Batch/Patch tabBatch Control Go to Level 3 or no actionLevel 2 or Patch T / Transfer Patch Level Patch DetectionPatch 4/Toggle Patch PatchOCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping