Kodak A-61580 manual Device Settings window, Information icons

Page 57

The Device Settings window

From this window you can set all scanner-specific options, as well as diagnostics, by using the available tabs. The values used in Device Settings are saved in the selected Setting Shortcut. The Device Settings window includes the following tabs: General, Printer, Multifeed, Image Address, Batch, Patch, and OCP.

Home — returns you to the main Kodak Scanner window. Image — displays the Image Settings window.

Preview — initiates a scan and then displays the Image Settings window with the scanned image placed in the preview area. The image displayed is a sample based on your current shortcut setting.

OK/Scan — when selected, you will be prompted to save any unsaved changes.

NOTE: If this button is OK, any unsaved changes will remain in affect for the current scan session.

Cancel — closes the main Kodak Scanner window without saving any changes.

Information icons

About: displays the scanner’s version and copyright information.

Help: displays help information for the window currently being displayed.

A-61580 November 2007

3-29

Image 57

Contents Page About this manual IntroductionImage outputs FG.jpg Best Practices Scanner setup Enable scanning Error handlingDisable scanning Initiate pollingPage Controlling image transfer order Dual stream duplex Dual stream simplexPage Jam and fault recovery Bar code recognition Image file storage locationsImage addressing Image address formatNext image address Starting image addressIndexing schemes Single level indexingTwo level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Level rules Electronic color dropoutControlling print strings Print string formattingContrast% = Threshold = Color Filter = Resolution = 200 dpiRed dropout Red Dropout  Near Complete DropoutGreen Dropout  Near Complete Dropout Green Dropout  Complete DropoutBlue Dropout  Complete Dropout Blue Dropout  Near Complete DropoutImage header information Page Original Black and white image Relative Cropping Zone processingPatch reading Programmable keysPatch code types Type 3 Patch CodeTransfer Patch Code Toggle PatchAdditional Patch Codes Batching Installation Overview Terminology and features Using the Twain DatasourceValidation tool Accessing the ScanSelect StartProgramsKodakDocument ImagingScan Validation ToolPage Main Kodak Scanner window Page Information icons Image Settings window Preview area Toolbar buttonsInformation icons Cases you will not have to change options on other tabs TabPage November None Landscape Degrees Image Settings Adjustments tabScan as selection of Black and White Image None Filters Noise NoneEnhancements tab Advanced Image Setup Input document is select Two Sided, One Sided Front, or One Advanced tabPage Done returns you to the Image Settings window November Sensitivity Content Settings tabPage Select Grayscale Select Sides Both Black and White 1-bit Select Sides Both Color 24-bitMake sure Black and White 1-bit is selected Creating multiple images for each side of a documentSelect Sides Both Color 24-bit Creating different settings for each side of a document Select Sides FrontSelect Sides Back Device Settings window Device General tab Paper sourceDocument Feeder Page Device Printer tab Page Yyyyddd Julian Date FormatFeed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a When Count Reached Device Batch tabReached. Options are none, Level 1, Level 2, and Level November As Level Device Patch tabFeature Device OCP tab Creating a new Setting Shortcut Page Page Main Isis Driver window Using the Isis DriverMain tab Image ModePage Page Image Orientation Layout tabGeneral options When Fixed to Transport or Relative to Document is selectedSuperior Color optionsScanner tab Power Saver TimeoutMulti-feed Detection OptionsPage Operations Page Color Content Learn Dropout tab Color DropoutBlank Image Detection Mode Imprinter tabDefining your print string Hyphen -, Period . , Blank or none. For example 08/24/2007Units select Inches, Centimeters or Pixels Image Address tab Level 2 Offset Address%2L Batch Control Batch/Patch tabGo to Level 3 or no action Transport End of Job, Continue and Begin New Batch or noLevel 2 or Patch T / Transfer Patch Level Patch DetectionPatch 4/Toggle Patch PatchOCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping