Kodak A-61580 manual Creating different settings for each side of a document, Select Sides Front

Page 56

Creating different settings for each side of a document

In this example, let’s assume you want to configure a two-sided document stream of business documents that have color on the front of the document but the rear side is fine in black and white.

1.If you are not already on the Advanced tab:

•Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output.

•Select Settings to display the Image Settings window.

•Select Advanced Image Setup icon on the Image Settings window to display the Advanced tab.

2.Select Input document is: Two Sided.

3.Turn on the Different settings per side option.

4.Select Images per side: One.

5. Select Done to return to the Image Settings window.

NOTE: You will notice that the Side option now has two entries: Front and Back.

6.Select Sides: Front.

7.Select Color (24-bit)for the Scan as option on the General tab.

Make any other adjustments to the front side settings on the rest of the tabs on the Image Settings window.

8.Select Sides: Back.

9.Select Black and White (1-bit)for the Scan as option on the General tab.

Make any other adjustments to the back side settings on the rest of the tabs on the Image Settings window.

10.When finished, select Home to return to the main Kodak Scanner window and then select Save to save your selections to the shortcut.

NOTE: If you selected any option other than Images per side: One in Step 4, two Images to Configure options groups would become available. You can then individually setup the images that will be produced for each side of the document.

3-28	A-61580 November 2007

Image 56

Contents Page Introduction About this manualImage outputs FG.jpg Best Practices Scanner setup Error handling Enable scanningDisable scanning Initiate pollingPage Controlling image transfer order Dual stream simplex Dual stream duplexPage Jam and fault recovery Image file storage locations Bar code recognitionImage addressing Image address formatStarting image address Next image addressIndexing schemes Single level indexingTwo level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Electronic color dropout Level rulesControlling print strings Print string formattingResolution = 200 dpi Contrast% = Threshold = Color Filter =Red dropout Red Dropout  Near Complete DropoutGreen Dropout  Complete Dropout Green Dropout  Near Complete DropoutBlue Dropout  Complete Dropout Blue Dropout  Near Complete DropoutImage header information Page Zone processing Original Black and white image Relative CroppingProgrammable keys Patch readingPatch code types Type 3 Patch CodeAdditional Patch Codes Transfer Patch CodeToggle Patch Batching Using the Twain Datasource Installation Overview Terminology and featuresAccessing the Scan Validation toolSelect StartProgramsKodakDocument ImagingScan Validation ToolPage Main Kodak Scanner window Page Information icons Image Settings window Toolbar buttons Preview areaInformation icons Tab Cases you will not have to change options on other tabsPage November None Landscape Degrees Scan as selection of Black and White Image SettingsAdjustments tab Filters Noise None Image NoneEnhancements tab Advanced Image Setup Advanced tab Input document is select Two Sided, One Sided Front, or OnePage Done returns you to the Image Settings window November Content Settings tab SensitivityPage Select Grayscale Select Sides Both Color 24-bit Select Sides Both Black and White 1-bitCreating multiple images for each side of a document Make sure Black and White 1-bit is selectedSelect Sides Both Color 24-bit Select Sides Back Creating different settings for each side of a documentSelect Sides Front Device Settings window Document Feeder Device General tabPaper source Page Device Printer tab Page Date Format Yyyyddd JulianFeed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a Reached. Options are none, Level 1, Level 2, and Level When Count ReachedDevice Batch tab November Device Patch tab As LevelFeature Device OCP tab Creating a new Setting Shortcut Page Page Using the Isis Driver Main Isis Driver windowImage Mode Main tabPage Page Layout tab Image OrientationWhen Fixed to Transport or Relative to Document is selected General optionsColor options SuperiorScanner tab Timeout Power SaverMulti-feed Detection OptionsPage Operations Page Color Content Learn Blank Image Detection Dropout tabColor Dropout Imprinter tab ModeUnits select Inches, Centimeters or Pixels Defining your print stringHyphen -, Period . , Blank or none. For example 08/24/2007 Image Address tab Level 2 Offset Address%2L Batch/Patch tab Batch ControlGo to Level 3 or no action Transport End of Job, Continue and Begin New Batch or noPatch Detection Level 2 or Patch T / Transfer Patch LevelPatch Patch 4/Toggle PatchOCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping