Kodak A-61580 manual Programmable keys, Patch reading, Patch code types, Type 3 Patch Code

Page 26

Programmable keys	Programmable keys are available for use by the operator when the
	scanner is enabled. The touchscreen displays the functions that are
	associated with these programmable keys. The programmable keys
	can be assigned the following functions:
	•	No scanner functionality (default)
	•	End Batch
	•	Omit Multi-feed
	•	Omit Printing
	•	Omit Patch
Patch reading	Patch Reading information, associated with image addressing, only
	applies when the scanner is configured with Image Address enabled
	via the operator control panel touchscreen.
	Patch reading allows you to change image address (IA) information for
	a document on the fly, without any host PC or touchscreen intervention.
	All documents with patch codes are imaged and cannot be
	automatically deleted by the scanner.
Patch code types	A patch code can change the IA level of the document that the patch

code occurs on (or the following document in the case of a Transfer patch). These changes then override the IA calculated using the Level to Follow Level rules.

Type 3 Patch Code

The image header reflects when a Type 3 patch code is detected on a document. A document containing a Type 3 patch code is considered to be a Level 3 document. The IA for that document is recalculated by incrementing the Level 3 field and setting the Level 2 and Level 1 fields to 0 (if the Level 2 and 1 fields are defined as having a field width greater than 0). In the image header, document level and patch type will be returned as a 3.

Type 2 Patch Code

The image header reflects when a Type 2 patch code is detected on a document. A document containing a Type 2 patch code is considered to be a Level 2 document. The IA for that document is recalculated by incrementing the Level 2 field and setting the Level 1 field to 0 (if the Level 1 field is defined as having a field width greater than 0). In the image header for this document, document level and patch type will be returned as a 2.

2-22	A-61580 November 2007

Image 26

Contents Page Introduction About this manualImage outputs FG.jpg Best Practices Scanner setup Disable scanning Error handlingEnable scanning Initiate pollingPage Controlling image transfer order Dual stream simplex Dual stream duplexPage Jam and fault recovery Image addressing Image file storage locationsBar code recognition Image address formatIndexing schemes Starting image addressNext image address Single level indexingTwo level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Controlling print strings Electronic color dropoutLevel rules Print string formattingRed dropout Resolution = 200 dpiContrast% = Threshold = Color Filter = Red Dropout  Near Complete DropoutBlue Dropout  Complete Dropout Green Dropout  Complete DropoutGreen Dropout  Near Complete Dropout Blue Dropout  Near Complete DropoutImage header information Page Zone processing Original Black and white image Relative CroppingPatch code types Programmable keysPatch reading Type 3 Patch CodeAdditional Patch Codes Transfer Patch CodeToggle Patch Batching Using the Twain Datasource Installation Overview Terminology and featuresSelect StartProgramsKodakDocument ImagingScan Accessing the ScanValidation tool Validation ToolPage Main Kodak Scanner window Page Information icons Image Settings window Toolbar buttons Preview areaInformation icons Tab Cases you will not have to change options on other tabsPage November None Landscape Degrees Scan as selection of Black and White Image SettingsAdjustments tab Filters Noise None Image NoneEnhancements tab Advanced Image Setup Advanced tab Input document is select Two Sided, One Sided Front, or OnePage Done returns you to the Image Settings window November Content Settings tab SensitivityPage Select Grayscale Select Sides Both Color 24-bit Select Sides Both Black and White 1-bitCreating multiple images for each side of a document Make sure Black and White 1-bit is selectedSelect Sides Both Color 24-bit Select Sides Back Creating different settings for each side of a documentSelect Sides Front Device Settings window Document Feeder Device General tabPaper source Page Device Printer tab Page Date Format Yyyyddd JulianFeed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a Reached. Options are none, Level 1, Level 2, and Level When Count ReachedDevice Batch tab November Device Patch tab As LevelFeature Device OCP tab Creating a new Setting Shortcut Page Page Using the Isis Driver Main Isis Driver windowImage Mode Main tabPage Page Layout tab Image OrientationWhen Fixed to Transport or Relative to Document is selected General optionsColor options SuperiorScanner tab Multi-feed Detection TimeoutPower Saver OptionsPage Operations Page Color Content Learn Blank Image Detection Dropout tabColor Dropout Imprinter tab ModeUnits select Inches, Centimeters or Pixels Defining your print stringHyphen -, Period . , Blank or none. For example 08/24/2007 Image Address tab Level 2 Offset Address%2L Go to Level 3 or no action Batch/Patch tabBatch Control Transport End of Job, Continue and Begin New Batch or noPatch Detection Level 2 or Patch T / Transfer Patch LevelPatch Patch 4/Toggle PatchOCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping