Kodak A-61580 manual Electronic color dropout, Level rules, Controlling print strings

Page 20

Level rules	Level rules are an automated way to control document image
	addressing based on the level of the previous document. For a level 3
	indexing scheme, the application must define the Level to Follow Level
	rules for Level 3, Level 2, and Level 1 For example:.

		Level to
	Level	Follow Level
	3	2

	2	1

	1	1

	Level to follow level rules are used to automatically drop to a lower
	level. Returning to a higher level is generally done through patch or
	application control of the next image address.
Controlling print strings	Full control and access to the scanner’s print string functionality is
	available to the host application. In addition, the print string information
	is returned to the host in the image header.

Print string formatting

Electronic color dropout

•Maximum character length  40.

•Character set  full alphanumeric, including special characters.

NOTE: To view Japanese characters correctly you must get the MS Gothic font set by installing the Microsoft Global IME 5.01 for Japanese – with Language Pack, English Language Version which can be found at http://www.microsoft.com/ms download/ iebuild/ime5_win32/en/ime5_win32htm.

•Distance from lead edge  a minimum of a .035-inch.

•Can print to within ½-inch of the trial edge.

The i1800 Series Scanners provide the ability to create dropout images without changing lamps. Red, green, blue dropout functionality can be selected. Only one color can be dropped out at a time. This dropout performance is equivalent to color dropout functionality when using the traditional color lamp technique.

Electronic color dropout is used with OCR and ICR applications. See your vendor’s documentation for recommendations on image quality characteristics.

Electronic color dropout is applied to the black and white image only.

There are four imaging parameters, which effect electronic color dropout: Threshold Value/Filter Threshold, Background Value/ Background, Contrast %, and Threshold.

The tables that follow provide Pantone colors that may be used with the red, green and blue dropout option.

2-16	A-61580 November 2007

Image 20

Contents Page Introduction About this manualImage outputs FG.jpg Best Practices Scanner setup Error handling Enable scanningDisable scanning Initiate pollingPage Controlling image transfer order Dual stream simplex Dual stream duplexPage Jam and fault recovery Image file storage locations Bar code recognitionImage addressing Image address formatStarting image address Next image addressIndexing schemes Single level indexingTwo level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Electronic color dropout Level rulesControlling print strings Print string formattingResolution = 200 dpi Contrast% = Threshold = Color Filter =Red dropout Red Dropout  Near Complete DropoutGreen Dropout  Complete Dropout Green Dropout  Near Complete DropoutBlue Dropout  Complete Dropout Blue Dropout  Near Complete DropoutImage header information Page Zone processing Original Black and white image Relative CroppingProgrammable keys Patch readingPatch code types Type 3 Patch CodeAdditional Patch Codes Transfer Patch CodeToggle Patch Batching Using the Twain Datasource Installation Overview Terminology and featuresAccessing the Scan Validation toolSelect StartProgramsKodakDocument ImagingScan Validation ToolPage Main Kodak Scanner window Page Information icons Image Settings window Toolbar buttons Preview areaInformation icons Tab Cases you will not have to change options on other tabsPage November None Landscape Degrees Scan as selection of Black and White Image SettingsAdjustments tab Filters Noise None Image NoneEnhancements tab Advanced Image Setup Advanced tab Input document is select Two Sided, One Sided Front, or OnePage Done returns you to the Image Settings window November Content Settings tab SensitivityPage Select Grayscale Select Sides Both Color 24-bit Select Sides Both Black and White 1-bitCreating multiple images for each side of a document Make sure Black and White 1-bit is selectedSelect Sides Both Color 24-bit Select Sides Back Creating different settings for each side of a documentSelect Sides Front Device Settings window Document Feeder Device General tabPaper source Page Device Printer tab Page Date Format Yyyyddd JulianFeed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a Reached. Options are none, Level 1, Level 2, and Level When Count ReachedDevice Batch tab November Device Patch tab As LevelFeature Device OCP tab Creating a new Setting Shortcut Page Page Using the Isis Driver Main Isis Driver windowImage Mode Main tabPage Page Layout tab Image OrientationWhen Fixed to Transport or Relative to Document is selected General optionsColor options SuperiorScanner tab Timeout Power SaverMulti-feed Detection OptionsPage Operations Page Color Content Learn Blank Image Detection Dropout tabColor Dropout Imprinter tab ModeUnits select Inches, Centimeters or Pixels Defining your print stringHyphen -, Period . , Blank or none. For example 08/24/2007 Image Address tab Level 2 Offset Address%2L Batch/Patch tab Batch ControlGo to Level 3 or no action Transport End of Job, Continue and Begin New Batch or noPatch Detection Level 2 or Patch T / Transfer Patch LevelPatch Patch 4/Toggle PatchOCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping