Kodak 8650 manual Setting up the printer

2 Setting up the printer

This chapter explains how to set up the KODAK DIGITAL SCIENCE 8650/8650 PS Color Printer. These steps are:

•Finding an appropriate location for the printer

•Unpacking the printer

•Removing the shipping tape and shipping pins

•Cleaning the print head

•Loading ribbon

•Unpacking and adjusting the paper tray

•Connecting the interface cables

•Connecting the power cord and turning the printer on

•Checking and changing the printer settings

The printer drivers and export module that enable you to take full advantage of the printer’s capabilities are on the CD-ROM shipped with the printer. After you set up the printer and before you use it, you should install the printer drivers and the export module.

This chapter does not explain how to install the printer drivers or the export module. For this information, refer to the user’s guide for the export module or the printer driver.

October 1997 2-1