Kodak 8650 manual Finding a location for the printer

Setting up the printer

Finding a location for the printer

As you look for an appropriate location for the printer, keep the following guidelines in mind. Refer to Appendix A for site requirements.

•Allow two inches (about 5 cm) on all sides of the printer for easy access.

•Place the printer so that air flow is not blocked.

•Airborne dirt particles can cause image quality problems. Avoid placing the printer in areas where ventilation ducts, open doors, or frequent passers–by might expose the printer and media to high levels of debris.

The space requirements for the printer are shown below.

2-2 October 1997