Kodak 8650 manual Adding an external hard drive, Installing the hard drive

Appendix C Customizing the printer

Adding an external hard drive

This procedure applies only to 8650 PS Color Printers operating in

PostScript mode.

If you want additional ATM fonts to be permanently accessible to the printer, you need to add an external hard drive. Once you connect and format an external hard drive, you can use the software utilities available for your system to download the ATM fonts and store them on the hard drive.

IMPORTANT:The size of the hard drive is limited to 2000 MB or less.

Installing the hard drive

First, connect the cable as follows:

1.Turn the printer Off.

2.Disconnect all devices that are connected to the printer with a SCSI cable.

3.Set the SCSI ID for the external hard drive to any ID that is different from the printer’s initiator ID. Refer to the manual shipped with the hard drive for instructions.

4.Connect one end of the SCSI cable to one of the printer’s

SCSI ports. Connect the other end of the cable to the hard drive.

SCSI ports

C-2 October 1997