Troubleshooting the printer
Repacking the printer
Pack the printer as follows if you need to ship it.
1.Remove media from the paper tray. Pack the paper tray in its original box.
2.Open the printer cover. Then remove the ribbon spools. Discard them or store them in their original box.
3.Insert the shipping pins as follows:
CAUTION: Insert the pins as described.
—Insert the left pin through the seventh slot from the left.
—Insert the right pin through the sixth slot from the right.
4.Push the pins until the ends protrude about 1 1/2 inches from the slot.
5. Close the printer cover.
October 1997 |