Controls – continued
AccuColor® Control Systems
AccuColor Control Systems: Six color presets select the desired color setting (sRGB and NATIVE color presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically improves the color fidelity in the desktop environment by a single standard RGB color space. With this color supported environment, the operator could easily and confidently communicate color without further color management overhead in the most common situations.
Tools
DVI SELECTION: This function selects the DVI input mode. If the DVI selections changes, you must restart the computer.
DIGITAL: DVI digital input is available.
ANALOG: DVI analog input is available.
NOTE: When using a MAC with digital output: before turning on the MAC, the DVI Input mode on the monitor must be set to DIGITAL in the DVI SELECTION menu. To set the DVI SELECTION to “DIGITAL” press the SELECT button then CONTROL button when the DVI signal cable is connected to the
NOTE: Depending on the type of PC/Video card or the type of video signal cable used, the DVI SELECTION function may not operate.
VIDEO DETECT: Selects the method of video detection when more than one video input source is connected is connected to the monitor.
FIRST: If “FIRST” is selected as the VIDEO DETECT option, the
monitor displays the signal from the first input port. If there is no signal present at the first input port, then the monitor will search for a signal from the next input port.
If a new input signal is connected to another of the monitorʼs input ports while the monitor is in FIRST mode, the monitor DOES NOT automatically SWITCH to the new source.
NONE: The monitor will only search other input ports while the power is on.
12